Disinfection and sanitising

Disinfection and sanitising for homes, villas and living spaces

A complete treatment for homes where a wipe-down is not enough. Every high-touch surface receives targeted spray, and each room is fogged with a disinfectant mist that settles on surfaces a cloth cannot reach.

  • Every handle and switch treated
  • Fogging reaches every corner
  • Safe for households with children
  • No harsh residue left behind

Why surface wiping alone is not enough

Door handles, light switches, and taps carry the highest load of surface contamination, yet they are the surfaces most often missed by a general clean. Fogging disperses a fine disinfectant mist that settles uniformly across a room, reaching shelves, AC grilles, and upholstered surfaces where a cloth cannot reach. Without a dwell period, the disinfectant does not have time to neutralise what it contacts.

  • After illness in the home

    When a household member has been ill, a surface wipe removes visible traces but does not address what has settled on soft furnishings, handles, and air surfaces. Fogging treats the whole room, not just what is reachable by hand.

  • Before moving into a property

    A property that looks clean may carry residue from previous occupants on surfaces that were never given a disinfectant treatment. A full walkthrough and fog before you unpack gives the household a clean baseline.

  • Seasonal or recurring household sanitation

    The combination of coastal humidity and constant fine dust means surfaces re-contaminate faster than in drier climates. Scheduling a treatment at intervals keeps the home in a sanitised state rather than waiting until contamination is visible.

  • Protecting vulnerable household members

    Young children and elderly family members spend more time in contact with floor surfaces, soft furnishings, and shared handles than other household members. A full disinfection treatment reduces the load they encounter daily.

What is included in the service

Every booking covers these eight steps, carried out in order so each stage supports the next.

  1. crew inspects home before starting

    crew inspects home before starting

    The crew walks through the property before any product is opened, noting occupied rooms, sensitive materials, and surfaces that need extra care.

  2. wiping dust from all surfaces

    wiping dust from all surfaces

    All horizontal surfaces are wiped free of dust before any disinfectant is applied, so the solution reaches the surface rather than sitting on top of a layer of dust.

  3. mixing the disinfectant solution

    mixing the disinfectant solution

    The disinfectant is mixed to the correct concentration for the surfaces and spaces being treated, using a formula appropriate for a residential setting.

  4. spraying handles switches and counters

    spraying handles switches and counters

    Handles, switches, taps, remote controls, and countertops are sprayed directly and left to dwell before being wiped clean.

  5. fogging rooms with disinfectant mist

    fogging rooms with disinfectant mist

    A fogging machine disperses a fine disinfectant mist through the room, which settles on surfaces the spray cannot reach, including the underside of furniture and curtain folds.

  6. treating kitchen and bathroom surfaces

    treating kitchen and bathroom surfaces

    Kitchen counters, sink surrounds, bathroom tiles, taps, and sanitary ware receive a targeted surface treatment with a formula suited to wet areas.

  7. leaving disinfectant to dwell

    leaving disinfectant to dwell

    The crew leaves each room closed for the dwell period recommended by the product specification, which is when the disinfectant does its work.

  8. ventilating rooms after treatment

    ventilating rooms after treatment

    After dwell time has passed, windows and doors are opened in sequence to clear the room before the household returns to use it.

How the treatment is carried out

The job follows a fixed order so no stage undoes the work of the one before it.

  1. Inspect and prepare the home

    The crew walks every room before mixing any product, identifying surfaces that need special care and confirming which areas the household needs access to during the job.

  2. Dust and prep all surfaces

    Every horizontal surface is wiped down before the disinfectant is prepared, so the solution reaches clean material rather than settling on top of dust.

  3. Apply spray and fog treatments

    High-touch points receive a direct spray that is left to dwell. Each room is then fogged with a fine disinfectant mist, the door closed, and the dwell time allowed to run.

  4. Ventilate and hand over

    Once the dwell period has passed, windows are opened in order, any surface residue wiped away, and the home handed back to the household.

What the home looks and feels like after

After treatment and ventilation, three things are noticeably different.

High-touch points treated throughout

Every handle, switch plate, tap, and countertop has received a contact spray that was left to dwell before the room was opened. The crew wipes away any residue before leaving.

Rooms cleared and ventilated

Each fogged room is ventilated before the household returns. Surfaces that collected settling mist are wiped down so nothing is left tacky or wet.

Kitchen and bathroom surfaces sanitised

Wet areas receive a separate surface treatment with a food-safe disinfectant where required. Grout, taps, and counters are treated individually, not just fogged.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
Hesham ZayanAugust 2026 · Review on Google Maps
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
Bashar Al-MushaikhiJuly 2026 · Review on Google Maps
«خدمة ممتازة.»
Abdullah Al-GhamdiAugust 2026 · Review on Google Maps
«ممتازين.»
Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Districts we cover

Disinfection and sanitising is available across the districts below. If yours is not listed, ask: the coverage is wider than the list.

Questions worth asking first

The time depends on the size of the property and how many rooms are fogged. Each room needs preparation, spray time, dwell time, and ventilation in sequence, so a larger home takes proportionally longer.

The household should leave the treated areas during fogging and dwell time. The crew will tell you which rooms are active at each stage so you can plan where to be during the job.

The solutions used are selected to be safe for residential use. After ventilation, residual product levels drop to safe levels before the family returns to normal use of the rooms.

Each fogged room stays closed for a set dwell period, then is ventilated before re-entry. The crew confirms when each room is clear. For most rooms this is a matter of hours, not days.

Yes. Wet areas receive a separate surface treatment suited to tiles, grout, and sanitary ware, in addition to the fogging that covers the rest of the room.

There is no single answer for every household. Homes with young children, elderly members, or anyone who has recently been ill benefit from more frequent treatments. A walkthrough before the first job helps set a schedule that fits the household.

Book a disinfection treatment for your home

Tell us the size of the property and which rooms need treatment, and we will arrange a time that works for you.

Cleaning and disinfection guidance: Saudi Ministry of Health.

Call WhatsApp