Chandelier cleaning for crystal drops and metal frames
Each crystal piece is taken down by hand, washed with a cleaning solution, and rehung dry. The service covers the full fitting from the canopy at the ceiling to the lowest pendant.
- Crystal drops and metal frame
- Each piece washed individually
- Homes, villas and reception rooms
- Floor covered, area left clear
What a dusty chandelier actually costs you
A chandelier that has not been cleaned in a long time dims visibly. Dust on crystal surfaces scatters light instead of refracting it. The fine airborne dust common in this climate builds up fast on upper fittings and glass surfaces. Leaving it in place does not just look poor; the accumulated grime on metal parts can pit or dull the finish over time.
-
Preparing the home for guests
A chandelier draws the eye the moment guests enter a majlis or reception room. Dust on crystal is obvious at close range, and cleaning brings the full refraction back before the occasion.
-
After building or renovation work
Construction dust is fine and settles on every horizontal surface and fitting. Crystal pieces trap it in the gaps between drops; removing them individually is the only way to clear it properly.
-
The fitting looks dimmer than before
Soiled crystal scatters rather than reflects light, so the room feels darker even when the bulbs are unchanged. The clarity that returns after a proper clean is measurable without any instruments.
-
Preparing a villa for sale or rental
Landlords and buyers notice ceilings. A cleaned chandelier signals that the rest of the property has been maintained, while a neglected one raises questions about everything else.
What the service includes
Every booking covers the full sequence from safety preparation to final clearance.
-
electricity switched off at source
Electricity to the fitting is switched off at the source before anyone goes near it, so there is no live current present during the job.
-
floor and furniture covered below
The floor directly below the chandelier and any furniture underneath it are covered to protect against drips and dropped fragments.
-
ladder positioned to reach chandelier
A ladder is positioned and secured to give safe, stable reach to the canopy and all hanging elements of the fitting.
-
crystal pieces removed individually
Each crystal piece, drop or pendant is unhooked by hand and set aside in sequence so they can be returned to the same positions.
-
each piece cleaned with solution
Every removed piece is cleaned individually with a solution that cuts through the oily dust film without leaving a cloudy residue.
-
metal frame wiped and dried
The metal frame, arms and canopy are wiped down with a dry cloth and any damp areas are dried before reassembly begins.
-
crystals reattached to frame
Each piece is reattached to the frame in the same order it came off, so the pattern and drop lengths match the original.
-
covers removed and area tidied
Floor covers are lifted and removed, the ladder is taken down, and the area beneath the fitting is left clear and tidy.
How the job runs from start to finish
The work follows a fixed sequence so that no stage undoes the one before it.
-
Site preparation
Power is cut at source, the floor below is covered, and the ladder is set in position. Nothing is touched on the fitting until these steps are confirmed.
-
Crystal removal
Each piece comes off by hand in sequence. They are laid out in order so there is no guesswork when it comes to putting them back.
-
Cleaning and drying
The crystal pieces are washed individually and set to dry. The metal frame is wiped down at the same time so the whole fitting is ready for reassembly together.
-
Reassembly and clearance
Crystal is reattached piece by piece, the covers are lifted, and the area is tidied. The customer is shown the finished fitting before the team leaves.
What the room looks like after
Once the work is finished and the covers are removed, three things are immediately visible.
Full light output restored
Each crystal surface is clear of dust and residue, so the fitting refracts light the way it was designed to. The brightness in the room returns without any change to the bulbs.
Metal frame clean and dry
The canopy, arms and fittings have been wiped down and are free of the greasy dust layer that builds up over time. No moisture is left on the metalwork.
Floor and furniture undisturbed
Covers placed before the work began are removed and the area is tidied. Nothing below the chandelier is marked, damp or displaced.
What our customers said
«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
«خدمة ممتازة.»
«ممتازين.»
Districts we cover
The service runs across a range of neighborhoods and districts. The full list of areas covered is shown below.
Questions worth asking first
The time depends on the size of the fitting and how many crystal pieces it holds. A straightforward ceiling chandelier typically takes a few hours from preparation to clearance. Larger or more complex fittings with many hanging elements take longer.
The team brings covers for the floor and furniture below the fitting. It helps to have the area beneath reasonably clear of objects that would be awkward to move around, but no special preparation is needed on your part.
Yes. Power to the fitting is cut at the source before anyone touches the chandelier, and it stays off until the crystals are back in place and the team is clear. This is not optional: working on a live fitting is not something done here.
In a home where the AC runs most of the year and fine dust is a constant, an annual clean is reasonable for a fitting that is used regularly. A chandelier in a formal room that is rarely opened can go longer, but once dust is visible on the crystal the clarity is already reduced.
Yes, provided there is safe ladder access to the canopy. Fittings that require scaffolding or rigging rather than a standard ladder fall outside the scope of a standard booking, so it is worth describing the height and layout when enquiring.
No treatment is left on the crystals after cleaning. The pieces are returned dry and clear. To slow the return of dust, keeping AC filters clean reduces the volume of fine particles circulating in the room, but this is general maintenance rather than something specific to the chandelier.
Other services you may need
Book your chandelier clean
Send a message with the size and location of the fitting, and we will confirm availability and timing. No guesswork needed on your end.
Cleaning and disinfection guidance: Saudi Ministry of Health.