Carpet and rug cleaning

Carpet and rug cleaning for homes, villas and majlis rooms

Rugs, fitted carpets and majlis floor runners accumulate layers of fine dust, skin cells and deeply embedded soiling that a standard vacuum cannot reach. Hot-water extraction draws this out from within the pile, leaving fibres clean all the way through.

  • Rugs, runners and fitted carpets
  • Hot-water extraction, not surface spray
  • Gentle on wool and silk
  • No lingering odour after cleaning

What a vacuum leaves behind in the pile

A vacuum lifts what sits on the surface fibres and nothing more. The fine dust, allergens and greasy particles that have worked their way into the pile stay locked in place until hot-water extraction draws them out. In a coastal climate with persistent humidity, any soiling left inside the fibres will return as odour on the first warm, damp day.

  • Allergens deep inside the pile

    Dust mites live inside the padding and lower fibres of rugs, not on the surface where a vacuum reaches. Hot water and suction together draw them out and the heat at that depth kills them.

  • Tackling stains the surface cannot shift

    Old stains set into rug fibres resist surface scrubbing because the residue has bonded below the pile. Pre-treatment loosens it at that depth before extraction pulls it free.

  • Stopping odour before it returns

    In a humid coastal climate, any soiling left inside the fibres reactivates on the first warm, damp day. Thorough extraction leaves nothing inside the pile for moisture to work on.

  • Extending the life of good rugs

    Abrasive particles that settle into rug fibres cut the individual threads with every footstep. Removing them before they work deeper keeps the pile dense and the surface looking even.

Everything included in the service

Each job follows the same sequence from inspection through to final edge detail.

  1. Inspect fibers and existing stains

    Inspect fibers and existing stains

    The technician checks fibre type, pile density and existing stains before any product is used, so the right method and dilution are chosen for that specific rug.

  2. Move furniture off carpet

    Move furniture off carpet

    Any furniture resting on the carpet or rug is moved aside before work begins, so the full surface area can be reached and no section is left untreated.

  3. Vacuum dust and dry debris

    Vacuum dust and dry debris

    A thorough pass with a high-suction vacuum lifts loose dust, hair and dry debris from the surface fibres before any liquid is applied.

  4. Spray solution onto stained spots

    Spray solution onto stained spots

    A targeted treatment solution is applied directly to stained areas and given time to loosen the bond between the soiling and the fibre before the main wash begins.

  5. Spread shampoo across full surface

    Spread shampoo across full surface

    Cleaning solution is spread evenly across the full carpet or rug surface to ensure consistent coverage before the scrubbing stage begins.

  6. Scrub with rotating brush machine

    Scrub with rotating brush machine

    A rotating brush machine works the shampoo into the pile, breaking up embedded particles and lifting compacted fibres so they are ready for extraction.

  7. Extract water with suction machine

    Extract water with suction machine

    A suction machine draws water and dissolved soiling back out of the fibres, removing it from the rug rather than pushing it deeper into the backing.

  8. Clean carpet edges by hand

    Clean carpet edges by hand

    The perimeter of the rug or fitted carpet, including tufted edges and borders, is cleaned by hand to reach areas the machine cannot access.

How the job runs, from start to finish

The same stages apply to every job, regardless of the carpet size or soiling level.

  1. Inspect and plan

    The technician examines fibre type, existing stains and soiling level to decide on the correct product strength and method before any equipment is brought in.

  2. Prepare the surface

    Furniture is moved, the area is vacuumed to clear loose debris, and stained zones are pretreated so the soiling has time to loosen before the main wash.

  3. Wash and extract

    Shampoo is spread across the full surface, worked in with a rotating brush, then drawn out along with dissolved soiling by a high-powered suction machine.

  4. Finish and hand over

    Edges and borders are cleaned by hand, furniture is returned, and the technician checks the full surface before leaving the space ready for drying.

What changes once the job is done

Each of these results is observable as soon as the carpet or rug is dry.

Fibres clean all the way through

Hot-water extraction draws soiling out from within the pile, not just the top layer. The result is a rug that stays clean longer because the base particles are gone.

Odour gone, not masked

There is no fragrance added to cover remaining soiling. The extraction removes what causes the smell, so there is nothing for humidity to reactivate later.

Pile restored to its natural texture

Rotary brush action and extraction together lift compacted fibres back toward their original position. The rug sits fuller and shows its pattern more clearly than before.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
Hesham ZayanAugust 2026 · Review on Google Maps
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
Bashar Al-MushaikhiJuly 2026 · Review on Google Maps
«خدمة ممتازة.»
Abdullah Al-GhamdiAugust 2026 · Review on Google Maps
«ممتازين.»
Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Districts we cover

The service runs across city neighbourhoods and the surrounding districts, with the full list of locations shown below.

Questions worth asking first

The time depends on the size of the area and how heavily soiled the fibres are. Larger rooms and multiple rugs naturally take longer than a single piece. The technician will assess the job on arrival and let you know what to expect before work begins.

Moving furniture off the carpet is part of the service. You do not need to clear the room yourself beforehand. If there are heavy or fragile pieces you would prefer the team not to move, mention this when booking and we will plan around them.

The solutions used are diluted to concentrations safe for home use. As a precaution, keep children and pets away from the treated area until the fibres are dry to the touch. The technician will let you know when the surface is safe to walk on again.

Drying time depends on the thickness of the pile, the room ventilation, and the humidity on the day. Thicker rugs and padded carpets hold more moisture and take longer. Opening windows and running a fan speeds drying considerably. The technician can advise you once they have seen the carpet.

Yes. The inspection stage before cleaning exists specifically to identify fibre type and pile construction. Wool, silk blends and handmade rugs are cleaned with lower pressure and pH-balanced solutions suited to natural fibres. The technician will tell you at inspection if a different approach is needed.

Keep the area ventilated until the carpet is fully dry and avoid placing furniture back on damp fibres. Once dry, a light vacuum pass helps lift fibres that compacted during the wash. Avoid walking on the surface in outdoor shoes until it is completely dry.

Book a carpet clean today

Tell us the size of the area and the type of rug or carpet, and we will arrange a time that suits you.

Cleaning and disinfection guidance: Saudi Ministry of Health.

Call WhatsApp