Marble grinding and crystal polishing in Al Sham, Jeddah
Al Sham is one of the most established quarters in the old city with residential and commercial buildings whose marble floors display heritage multi-coloured patterns. Humidity, dust and sea salt have dulled the original marble lustre over decades. Polishing reveals true colours and restores smoothness and shine.
- Marble, granite and terrazzo
- Progressive diamond-pad grinding
- Hotels, malls and lobbies
- Finish locked into stone
Why grinding must come before polishing
A historic quarter dense with heritage buildings, where marble in facades and floors accumulates salt and dust from daily foot traffic and coastal humidity.
-
Worn lobbies and entrance floors
Marble in Al Sham needs full inspection to determine accumulated salt and dust levels and which layers can be safely removed.
-
Post-construction stone preparation
Grinding extracts salt from marble pores at depth, and ventilation after grinding removes excess moisture and speeds drying.
-
Scratched or acid-etched stone
Original colours emerge after layer removal, and marble regains its shine and smooth texture.
-
Ongoing maintenance schedule
Protecting marble from future salt requires periodic polishing, good ventilation and preventing moisture accumulation.
What every job includes
-
Crew inspects marble surface condition
-
Furniture and adjacent edges covered
-
Coarse diamond discs grind the marble
-
Fine diamond pads hone the surface
-
Grinding slurry vacuumed and removed
-
Crystal powder spread across surface
-
Heavy rotary machine burnishes the powder
-
Edges and corners polished by hand
How a marble polishing job runs
-
Surface survey and setup
-
Coarse and fine grinding
-
Slurry removal and crystal application
-
Edge detail and handover
What changes about marble grinding and crystal polishing in Al Sham
Marble in heritage shops shows white discolouration from salt and dust faster than any other quarter in the old city due to heavy foot traffic. For the whole method, see how we approach marble grinding and crystal polishing.
-
The first reason
Sea salt penetrates marble surfaces deeply
Al Sham's proximity to the coast exposes it to salt-laden winds. Fine salt enters marble pores and crystallises at depths beyond the reach of sweeps or surface cleaning.
-
The second reason
Constant foot traffic leaves marble rough and dull
Souk Al Alawi and continuous visitor traffic cause abrasion that wears away the fine surface layer of marble. Grinding restores smoothness and original shine.
-
The third reason
Original colours are buried beneath dust and salt layers
Coloured marble in Al Sham dates decades back, and surface layers have masked true hues. Grinding and polishing unearth the original colours clearly.
The character of Al Sham
Historic district: close-set buildings, narrow lanes and ageing services
Al Sham is a cohesive old urban fabric where heritage and daily life are intertwined, and marble in its floors bears witness to different periods of the quarter's history.
The surface you are left with
A true mirror finish
The surface reflects light cleanly because the stone itself is flat, not because a coating sits on top.
Edges as polished as the field
Hand-detailing at skirting lines, doorframes and column bases matches the field polish.
No residue left on site
Grinding produces a wet slurry that is vacuumed and removed before the polishing stage begins.
What our customers said
«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
«خدمة ممتازة.»
«ممتازين.»
Some of our work
Illustrative photographs. Our own job photographs go here as soon as the client approves them.
What is different about Central Jeddah
Central Jeddah is the densest part of the city. Around the historic core of Al Balad the streets are narrow, the blocks are old, and most buildings have shops at ground level with flats above, so stairwells open onto markets and workshops. The main arteries, Madinah Road, King Fahd Road and Palestine Street, carry the heaviest traffic in Jeddah, and their exhaust leaves a dark, greasy soot unlike the dry sand of the outskirts. Old render holds it, summer heat bakes it on, and restoration work in the old quarter adds stone dust.
Nearby districts we cover
Questions worth asking first
Yes, colours are buried only beneath dust and salt. Grinding removes surface layers and reveals the true colours that were there from the start.
Humidity deepens salt reactions with marble surface. Polishing cleans the surface and grinding extracts salt from the pores.
Polishing gives temporary protection but salt will return with humidity. Repeating polishing every six months maintains shine and protection.
Cleaning removes only surface dust, but grinding removes accumulated layers and extracts salt from stone pores.
Yes, but it requires careful inspection first. The crew determines safe grinding depth based on marble age and condition.
Time depends on floor size, marble condition and accumulated dust. Estimate is provided after initial site inspection.
It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Sham.
Duration depends on the stone condition and the surface area.
Furniture that cannot be moved by the crew should be moved before arrival.
Other services in Al Sham
We also provide these services in Al Sham.
