Water tank waterproofing

Water tank waterproofing in Al Asaliyah, Jeddah

Al Asaliyah is a small locality in outer south Jeddah close to an iron foundry and heavy goods routes. Grey industrial dust mixed with diesel particles enters unsealed tanks rapidly and renders water unfit to drink. Waterproofing protects the tank from industrial contamination and elevated humidity from nearby works.

  • Interior surfaces fully sealed
  • Food-safe coating materials
  • Cracks and gaps filled first
  • Inspected before handover

Why tank waterproofing protects your water supply

A remote location beyond Jeddah's main zones, near the Jeddah Makkah Expressway, surrounded by factories, warehouses, and a sewage treatment facility, with regular heavy lorry traffic.

  • Seal before a leak develops

    Heavy factory dust causes accelerated crack formation, and waterproofing prevents leaks that damage the ceiling and building.

  • Repair an existing slow drip

    Addressing tank leaks here is urgent before industrial dust further compromises water quality.

  • Keep drinking water free of debris

    Industrial pollutants contaminate water very rapidly, and sealing preserves water quality despite the polluted surroundings.

  • Reduce maintenance over time

    Renewing an old tank with waterproofing rather than replacing it is the practical choice in this industrial location.

Everything included in the service

  1. Tank drained of water

    Tank drained of water

  2. Walls scrubbed with brush

    Walls scrubbed with brush

  3. Surfaces dried before coating

    Surfaces dried before coating

  4. Cracks and gaps sealed

    Cracks and gaps sealed

  5. Primer coat brushed on

    Primer coat brushed on

  6. Waterproofing coat brushed on

    Waterproofing coat brushed on

  7. Second coat applied over first

    Second coat applied over first

  8. Coating inspected before leaving

    Coating inspected before leaving

How the waterproofing job is carried out

  1. Booking and access arrangement

  2. Draining, cleaning, and drying

  3. Sealing and coating

  4. Inspection and handover

What changes about water tank waterproofing in Al Asaliyah

Dust here is grey industrial matter mixed with metal particles and diesel soot, settling quickly and resisting ordinary water rinsing. For the whole method, see water tank waterproofing in detail.

  • The first reason

    Factory dust and diesel mix with moisture and harden on walls

    Industrial dust contains fine metal particles and diesel soot that mix with sea humidity to form a hard, stubborn layer. This dust enters the tank and discolours the water a dark grey that cannot be filtered out.

  • The second reason

    Heavy lorry traffic continuously raises suspended industrial dust

    The nearby heavy goods route raises dust clouds throughout day and night. Vibrations from the lorries can create small cracks in the tank that allow dusty air and moisture to enter.

  • The third reason

    Sewage treatment moisture accelerates bacterial and algal growth in the tank

    High humidity from the nearby treatment works creates ideal conditions for bacteria and algae to colonise tank walls. Waterproofing cuts off the moisture source and prevents this growth entirely.

Landmarks of Al Asaliyah

The location sits near clearly recognisable industrial landmarks: the Khayyat Red Brick Factory is a well-known reference point, and the Jeddah Makkah Expressway provides direct and safe access for the team.

  • Jeddah Makkah Expressway
  • Al Jumum Road
  • Bahrah Health Center
  • Khayyat Red Brick Factory

What the tank looks like after

A sealed, smooth interior surface

The coating bonds to the concrete or fibreglass and fills any hairline cracks that were present.

No active leaks or seeping

Gaps that were allowing water to seep through the walls or base are filled and covered.

Food-safe lining throughout

Every applied material is rated safe for contact with drinking water.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
Hesham ZayanAugust 2026 · Review on Google Maps
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
Bashar Al-MushaikhiJuly 2026 · Review on Google Maps
«خدمة ممتازة.»
Abdullah Al-GhamdiAugust 2026 · Review on Google Maps
«ممتازين.»
Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Some of our work

Sofa cleaning
Sofa cleaning
Carpet and rug cleaning
Carpet and rug cleaning
Villa cleaning
Villa cleaning
Majlis and rest-house cleaning
Majlis and rest-house cleaning
Kitchen cleaning
Kitchen cleaning
Chandelier cleaning
Chandelier cleaning
Bathroom cleaning
Bathroom cleaning
Mattress cleaning
Mattress cleaning
Office cleaning
Office cleaning
Hotel and resort cleaning
Hotel and resort cleaning
Shopping centre cleaning
Shopping centre cleaning
Marble grinding and crystal polishing
Marble grinding and crystal polishing

Illustrative photographs. Our own job photographs go here as soon as the client approves them.

What is different about South Jeddah

South Jeddah is the working end of the city: the Islamic Port, the industrial city with its warehouses and workshops, and behind them older low rise districts such as Ghulail and Al Khumrah. The roads are built for lorries, and port and factory traffic runs through the night, so the dust that settles here is grey with diesel and metal filings rather than pale sand. Buildings are mostly older concrete with flat roofs and open stairwells that collect it. Sea humidity keeps it damp, and in summer it sets hard on ledges and cladding.

Nearby districts we cover

Questions worth asking first

Yes, metal particles, diesel soot and industrial dust penetrate small openings and cracks. Waterproofing blocks these pollutants completely and preserves water purity.

Yes, continuous vibrations from passing lorries cause cracks to form and grow. Waterproofing prevents pollutants from entering through these cracks.

Yes, factory dust is heavier and far harder to clean. Metal particles and diesel soot adhere stubbornly to tank walls and resist normal water cleaning.

Provide substantially more water than usual for initial tank cleaning, which will require more intensive effort than in other areas. Ensure the team has safe roof access.

Yes, after sealing and thorough cleaning, water becomes safe and free of factory pollutants. Regular inspection is important to ensure protection remains in place.

Inspection every six months is recommended here due to the polluted environment. Complete re-waterproofing is typically needed every three years.

It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Asaliyah.

The duration depends on the tank size and how long the interior needs to dry before coating.

No special preparation is needed on the household's side.

Need water tank waterproofing in Al Asaliyah?

We reach Al Asaliyah at a time we agree, and you get the full cost before we start.

Call WhatsApp