Swimming pool cleaning in Al Asaliyah, Jeddah

Pools in Al Asaliyah, a small district on the outer south eastern edge of Jeddah, face challenges unlike any residential neighbourhood. Industrial dust, diesel soot and metal particles from constant truck traffic to the Islamic Port and industrial zone settle as greasy grey matter, not pale sand. Salt humidity from the coast binds this soot hard to surfaces and corrodes equipment. The water here demands chemistry tailored to heavy pollutants and mechanical cleaning tuned to industrial grime.

Call now WhatsApp

Filter backwash included
Water chemistry checked
Walls and floor scrubbed
Deck rinsed after service

Why a clean pool needs more than skimming

Al Asaliyah sits between the Jeddah Makkah Expressway and Al Jumum Road, in close proximity to the Khayyat Red Brick Factory and high-volume freight traffic flowing toward port and industrial areas, with the coastal humidity from the Islamic Port zone inland.

Algae spreads faster than it looks

Water chemistry testing here must include a metals panel monthly, not a basic free chlorine test. Iron, copper and zinc ions accumulate faster and require chelation or precipitation treatment to stay below taste and odour thresholds.
Filter performance drops quietly

Filter performance is compromised not just by particle load but by chemical coating buildup. Monthly deep backwash alone is insufficient; cartridges must be cleaned or replaced every six to eight weeks to maintain rated flow.
Chemistry imbalance damages pool surfaces

Chemistry imbalance here stems from dissolved metals and high salinity, not just algae or organic matter. Correcting pH and alkalinity is essential before aggressive chlorination, or the chlorine oxidises the metals and the pool turns cloudy grey.
Floor sediment clouds the water

Sediment on the floor is heavy and metallic, not light sand. Vacuuming must be thorough and frequency must increase to twice weekly during high industrial activity periods, as metal filings settle rapidly and create an abrasive slurry.

What every pool service visit covers

Inspecting the pool condition
Skimming floating debris from surface
Brushing walls and pool steps
Vacuuming sediment from pool floor
Cleaning and backwashing water filter
Testing pool water chemistry
Dosing pool with treatment chemicals
Rinsing the surrounding pool deck

How a pool cleaning visit runs

Inspect and assess condition
Clean surfaces and floor
Service the filter
Test water and balance chemistry

What changes about swimming pool cleaning in Al Asaliyah

Diesel soot and metal filings adhere to pool surfaces with salt moisture and harden in summer heat into a stubborn coating that water and standard brushing cannot lift. For the whole method, see what swimming pool cleaning involves.

The first reason
Greasy diesel soot hardens on every surface

Grey dust from truck exhaust and machine grinding settles wet because coastal humidity keeps it damp, then bakes hard as stone in summer sun. Brushing alone cannot remove it; acid wash or solvent application is required weekly, not monthly. The hardened residue stains light coloured tile a permanent dull brown unless removed before it sets, making cleaning timing critical. Standard fibreglass and plaster surfaces are damaged by aggressive scrubbing, so chemical dissolution precedes mechanical work.
The second reason
Industrial pollutants render chlorine inefficient

Diesel compounds, metal particles and organic soot do not oxidise easily in chlorine like common organic matter does. The free chlorine level reads adequate but the pool remains cloudy and the water smells of metal. Heavy metals must be tested separately, and chelating compounds are often needed alongside standard chlorine to break down complex pollutants. Chemistry here cannot follow basic seasonal routines.
The third reason
Salt moisture corrodes all metal equipment rapidly

The combination of humid salt air and industrial pollution accelerates rust on filter housings, pump bodies, ladder hardware and even stainless fasteners. Equipment that lasts five years elsewhere fails in two years here. Filter internals corrode, reducing flow; pump seals degrade faster; ladder feet pit and weaken. Protective coatings require re-application yearly, and metal components need inspection every two months, not seasonally.

Landmarks of Al Asaliyah

Access to pools in Al Asaliyah is routed via the Jeddah Makkah Expressway and Al Jumum Road, with the Khayyat Red Brick Factory serving as a key landmark to orient visits. The industrial setting defines water quality challenges and service frequency requirements.

Jeddah Makkah Expressway
Al Jumum Road
Bahrah Health Center
Khayyat Red Brick Factory

What the pool looks like after the visit

Water within correct chemistry range

pH, alkalinity, and sanitiser levels are tested and adjusted during the visit.

Walls and floor visibly clean

Brushed walls and a vacuumed floor leave no algae film, no sediment layer, and no debris settled at the drain or on the steps.

Filter running at rated flow

The backwashed filter discharges freely and the pressure gauge reads within its normal operating band.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»

Hesham ZayanAugust 2026 · Review on Google Maps

«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»

Bashar Al-MushaikhiJuly 2026 · Review on Google Maps

«خدمة ممتازة.»

Abdullah Al-GhamdiAugust 2026 · Review on Google Maps

«ممتازين.»

Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Some of our work

Illustrative photographs. Our own job photographs go here as soon as the client approves them.

What is different about South Jeddah

South Jeddah is the working end of the city: the Islamic Port, the industrial city with its warehouses and workshops, and behind them older low rise districts such as Ghulail and Al Khumrah. The roads are built for lorries, and port and factory traffic runs through the night, so the dust that settles here is grey with diesel and metal filings rather than pale sand. Buildings are mostly older concrete with flat roofs and open stairwells that collect it. Sea humidity keeps it damp, and in summer it sets hard on ledges and cladding.

Nearby districts we cover

Al Atheer Al Sahl Al Mursalat

Questions worth asking first

Why does the pool smell metallic even with good chlorine readings?

Industrial heavy metals dissolve into the water from the surrounding air and adjacent factory operations. High free chlorine alone does not oxidise metal ions. A metals test panel is essential; treatment may require a sequestering agent specific to iron, copper or zinc to resolve the taste and odour.

Can standard pool brushes remove the black oily film here?

Standard brushes push the film around but do not lift it because salt moisture bonds it to the surface. Acid treatment followed by soft brush or cloth, then vacuuming, is the proven sequence. Aggressive brushing damages the surface underneath without removing the soot layer.

How often should filter cartridges be replaced in Al Asaliyah?

Every six to eight weeks instead of the typical four months. The combination of fine soot and metal particles clogs cartridges far faster. A clogged cartridge reduces flow and allows pollutants to bypass the filter media, clouding the water.

Is the tap water here safe to fill a new pool from?

Municipal water is potable but may carry industrial particles and elevated salinity. A pre-fill test for turbidity, iron, and salinity is prudent. Allowing tap water to settle overnight or filtering through a separate cartridge before pool entry removes coarser particles.

Does the pool need draining more often because of pollution?

Not necessarily for pollution alone, but the buildup of dissolved salts and metal compounds rises faster. A water analysis in late summer may show dissolved solids above optimal ranges, suggesting a partial drain and top-up rather than full replacement, to reduce waste.

Why do ladder and pool hardware rust so fast here?

Salt air plus diesel soot creates an electrolyte that accelerates corrosion. Stainless steel still corrodes here, though slower than carbon steel. Annual inspection of all metal fixtures is essential, and replacement intervals compress to two to three years for exposed hardware.

How much does swimming pool cleaning in Al Asaliyah cost?

It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Asaliyah.