Water tank cleaning and sterilising

Water tank cleaning and sterilising in Kilo 18, Jeddah

Kilo 18 is an industrial point on the Old Makkah Road at the far southeast edge of Jeddah, within a belt of industrial and storage activity that sprawls beyond the city. Warehouses, factories and loading yards release heavy industrial dust entirely different from ordinary residential dust. Tanks here collect metal filings, concrete and cement dust, and particles from cargo handling that accumulate into thick grey sediment.

  • Full interior scrub-down
  • Sediment and sludge removed
  • Drinking-water safe sterilant
  • Hatch sealed after service

Why a clean tank matters for your water supply

An industrial and storage zone on the far southeast edge with warehouses, workshops, factories and loading yards, where heavy industrial dust and metal particles are the primary contaminants threatening water quality.

  • Seasonal maintenance before peak use

    Heavy metal sediment settles quickly to tank bottoms, making cleaning every eight weeks necessary before summer when industrial activity and ambient heat both increase.

  • After a long property vacancy

    After extended closure or holiday shutdown, standing water in an industrial zone becomes severely turbid and unsuitable for drinking. Immediate professional cleaning on resumption is essential.

  • Visible discolouration or unusual taste

    When operations resume after shutdown, the tank requires complete drainage and deep cleaning because metal dust may have settled heavily and consolidated.

  • Landlord or building inspection requirements

    Before summer operating season ramps up, additional cleaning and sterilisation are necessary because industrial activity and heat together accelerate the accumulation of heavy dust.

What is included in every tank clean

  1. Opening and inspecting tank hatch

    Opening and inspecting tank hatch

  2. Draining water from the tank

    Draining water from the tank

  3. Scrubbing interior walls and floor

    Scrubbing interior walls and floor

  4. Removing accumulated sludge and sediment

    Removing accumulated sludge and sediment

  5. Rinsing interior walls and floor

    Rinsing interior walls and floor

  6. Spraying sterilising solution on surfaces

    Spraying sterilising solution on surfaces

  7. Flushing out sterilant residue

    Flushing out sterilant residue

  8. Sealing and securing the hatch

    Sealing and securing the hatch

How the cleaning process works, step by step

  1. Survey and drain

  2. Scrub and remove sediment

  3. Rinse and sterilise

  4. Final flush and seal

What changes about water tank cleaning and sterilising in Kilo 18

Tanks in industrial zones accumulate heavy metal particles and machine filings that are harder to remove than ordinary dust because they adhere more strongly to surfaces and corrode pipes. For the whole method, see what water tank cleaning and sterilising involves.

  • The first reason

    Metal filings from machinery bond strongly to tank walls

    Factories and workshops release fine metallic particles that fly easily into the air and enter tanks readily. These metal particles adhere to walls more tenaciously than sand and cause severe water discolouration and metallic taste.

  • The second reason

    Grey concrete and cement dust settles with greater weight

    Concrete and cement dust from buildings and structures behaves differently from desert sand: it is heavier, stickier and requires aggressive scrubbing to remove from tank walls and sediment accumulation zones.

  • The third reason

    Constant machinery noise and activity regenerate metal dust

    The industrial zone operates continuously, with lorries, machines and workers constantly lifting fresh industrial dust. Tanks never experience quiet periods where dust settles and clears undisturbed.

Kilo 18 on the map

Kilo 18 sits about 1 km from Al Huthaifat and about 3 km from Al Mursalat.

Open in Google Maps

What you have when the work is done

Interior walls free of scale

The scrubbing stage removes deposited minerals and biofilm from every reachable surface.

Sterilant applied and flushed out

A drinking-water-safe sterilising solution is applied to all interior surfaces and then fully flushed before the hatch is sealed.

Hatch secured and sealed

The hatch is resealed after the final flush to prevent airborne dust and insects from entering the tank.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
Hesham ZayanAugust 2026 · Review on Google Maps
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
Bashar Al-MushaikhiJuly 2026 · Review on Google Maps
«خدمة ممتازة.»
Abdullah Al-GhamdiAugust 2026 · Review on Google Maps
«ممتازين.»
Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Some of our work

Sofa cleaning
Sofa cleaning
Carpet and rug cleaning
Carpet and rug cleaning
Villa cleaning
Villa cleaning
Majlis and rest-house cleaning
Majlis and rest-house cleaning
Kitchen cleaning
Kitchen cleaning
Chandelier cleaning
Chandelier cleaning
Bathroom cleaning
Bathroom cleaning
Mattress cleaning
Mattress cleaning
Office cleaning
Office cleaning
Hotel and resort cleaning
Hotel and resort cleaning
Shopping centre cleaning
Shopping centre cleaning
Marble grinding and crystal polishing
Marble grinding and crystal polishing

Illustrative photographs. Our own job photographs go here as soon as the client approves them.

The character of Kilo 18

Industrial area: workshops, warehouses and loading yards

Industrial zones present unique challenges: metal filings from machinery, heavy concrete dust, and continuous activity that regenerates contamination daily. Water may be severely polluted with metals and particles, requiring much stronger and more frequent cleaning than any residential neighbourhood.

Nearby districts we cover

Questions worth asking first

Yes, substantially. Metal filings and industrial particles adhere far more strongly, requiring deep scrubbing and aggressive wall cleaning much more vigorous than ordinary sand-based sediment.

Severe turbidity from metals means water is unsafe to drink even when boiled. Fine metal particles can cause health problems if the tank is not cleaned regularly with strong sterilisation.

Slightly. Workshop dust is more metallic and finer, whereas warehouse dust tends to be cement and concrete particles. Both are heavy and require forceful cleaning.

Yes, dramatically. Industrial activity peaks during work hours, so dust accumulation is much faster than at night, and particles reach the tank more quickly.

Active industrial zones need cleaning roughly every eight weeks, potentially more frequently if industrial activity is very heavy or uninterrupted.

Yes. Stronger supplementary sterilisation is essential because metal-contaminated water may harbour more bacteria. Chemical protection must be robust in these conditions.

It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Kilo 18.

Once a year is the most common schedule for a household tank in regular use.

Yes.

Need water tank cleaning and sterilising in Kilo 18?

We reach Kilo 18 at a time we agree, and you get the full cost before we start.

Call WhatsApp