Factory and warehouse cleaning in Kilo 18, Jeddah
Kilo 18 sits along the Old Makkah Road far from the city centre, within the Al Muhajjar Logistics Zone where warehouses, distribution hubs and storage facilities serve Jeddah and nearby regions. Dust from unmetalled roads and the expressway spreads across warehouse floors and roofs, and high heat and moisture in open areas accelerate salt, mould and dirt buildup.
- Full overhead and floor coverage
- Machine scrubbing, not mopping
- Safe around active equipment
- Top-down sequence prevents re-soiling
Why a working facility needs more than a sweep
A distant logistics zone on the Old Makkah Road, with large warehouses and distribution centres handling export and import flows, and surrounding unmade roads that continuously raise dust clouds.
-
Hygiene compliance before audits
Logistics warehouses on remote roads face continuous dust from unmade roads and quarries, requiring regular cleaning of floors, ceilings and equipment to maintain hygiene.
-
Preventing equipment contamination
Moisture from open terrain and extreme heat accelerate salt deposition and mould growth on interior surfaces and metal equipment stored inside.
-
Safer working conditions for staff
Large ceiling heights and vast floor areas require specialised access equipment to reach high corners and remote zones where dust particles and moisture accumulate.
-
Clean handover for incoming tenants
Warehouse floor cleaning requires removal of salt and dust from deep within the concrete layer to prevent mould and rust on stored equipment and goods.
Everything covered in this service
-
Walk facility mapping work zones
-
Clear debris and industrial waste
-
Clean rafters beams and high shelving
-
Wipe down machinery and equipment surfaces
-
Scrub storage racks and shelving units
-
Machine-scrub the warehouse floor
-
Pressure-wash loading docks and entrances
-
Clear floor drains and grates
How a warehouse clean runs from start to finish
-
Survey and zone mapping
-
Overhead and high-surface work
-
Equipment, racks, and floor scrubbing
-
Docks, drains, and sign-off
What changes about factory and warehouse cleaning in Kilo 18
Warehouses far from the city face constant road dust, moisture from open terrain and intense heat, leaving thick layers of settled grime on floors, ceilings and stored equipment. For the whole method, see the full factory and warehouse cleaning page.
-
The first reason
Road dust penetrates every corner
Unmade roads and nearby quarries send clouds of fine dust that works into cracks and gaps in warehouse structures. Cleaning requires comprehensive coverage of ceilings, beams, corners and high zones where fine particles accumulate.
-
The second reason
Heat and moisture speed mould and salt buildup
In open distant areas, moisture from the terrain and extreme heat cause rapid mould growth and chemical reactions. Salt from soil and air deposits on ceilings and walls, leaving stains and rust marks on metal equipment and storage racks.
-
The third reason
Large warehouses need coordinated cleaning
Vast storage areas with concrete floors, high ceilings and limited ventilation demand systematic planning to cover every zone without disrupting ongoing logistics and transport operations.
Kilo 18 on the map
Kilo 18 sits about 1 km from Al Huthaifat and about 3 km from Al Mursalat.
Open in Google MapsWhat the facility looks like when the crew leaves
Clear drains and unblocked grates
Every floor drain and grate is cleared of sediment and debris before the crew leaves.
Overhead surfaces free of settled dust
Rafters, beams, and high-shelf tops no longer carry dust loads that fall with vibration or air movement.
Machine surfaces and racks clean to the touch
Equipment exteriors and storage rack surfaces have been wiped and scrubbed, not just sprayed.
What our customers said
«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
«خدمة ممتازة.»
«ممتازين.»
Some of our work
Illustrative photographs. Our own job photographs go here as soon as the client approves them.
The character of Kilo 18
Industrial area: workshops, warehouses and loading yards
Industrial warehouses at Kilo 18 operate continuously and store diverse goods and equipment. Cleaning must be systematic and regular to prevent dust, salt and mould accumulation, while keeping logistics operations running without interruption.
Nearby districts we cover
Questions worth asking first
Yes. Cleaning is scheduled for night shifts or shutdown days, or different sections are cleaned in rotation without interrupting transport and distribution flow.
Dust enters constantly from unmade roads and quarries. Regular cleaning and sealing gaps reduce intake, but deep extraction is necessary to remove accumulated layers.
Salt and staining deposit from moisture and salt-laden air. Cleaning removes most deposits, but old, hardened salt residue may leave a faint permanent mark.
Mould indicates trapped moisture. Deep cleaning removes visible mould, but ventilation and drainage must be inspected to prevent mould from returning.
Cleaning frequency depends on transport activity and dust entry rates. Monthly inspection determines cleaning needs based on dirt and salt accumulation.
Regular cleaning removes salt and dust before rust develops. Protective coating or covers on equipment reduce damage, but regular cleaning remains essential.
It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Kilo 18.
Racking and stored inventory do not need to move for most of the work.
Duration depends on floor area, ceiling height, rack density, and the condition of the facility going in.
Other services in Kilo 18
We also provide these services in Kilo 18.
