Factory and warehouse cleaning in Kilo 14, Jeddah
Kilo 14 combines car repair workshops and storage facilities in a modern industrial complex alongside dense housing, with floors accumulating oil, grease and metallic dust from daily operations. Corners and gaps between machinery trap metal scraps, wiring and debris that routine cleaning cannot reach. Deep industrial cleaning extracts these deposits and leaves floors safe for work.
- Full overhead and floor coverage
- Machine scrubbing, not mopping
- Safe around active equipment
- Top-down sequence prevents re-soiling
Why a working facility needs more than a sweep
An active industrial zone with multiple repair workshops and storage facilities, where intensive work generates rapid buildup of oily residue and fine metal particles across all surfaces.
-
Hygiene compliance before audits
Oil and grease seep into concrete fast in active workshops, and inspection determines deposit depth and the best removal method.
-
Preventing equipment contamination
Wet and slippery floors create hazard for workers, and cleaning removes liquids and leaves the surface dry and safe.
-
Safer working conditions for staff
Metal scrap, cut wiring and small debris hide in gaps and require careful extraction to prevent worker injury.
-
Clean handover for incoming tenants
Heavy odours from oils and solvents disappear when sources are removed, and the workshop air becomes clean and free from industrial pollution.
Everything covered in this service
-
Walk facility mapping work zones
-
Clear debris and industrial waste
-
Clean rafters beams and high shelving
-
Wipe down machinery and equipment surfaces
-
Scrub storage racks and shelving units
-
Machine-scrub the warehouse floor
-
Pressure-wash loading docks and entrances
-
Clear floor drains and grates
How a warehouse clean runs from start to finish
-
Survey and zone mapping
-
Overhead and high-surface work
-
Equipment, racks, and floor scrubbing
-
Docks, drains, and sign-off
What changes about factory and warehouse cleaning in Kilo 14
Kilo 14 workshops experience faster oil and grease accumulation than other industrial zones because workshop density is high and work runs continuously throughout the day. For the whole method, see factory and warehouse cleaning in detail.
-
The first reason
Oils penetrate concrete floors deeply
Motor oil and grease from vehicle repair seep into concrete pores and leave stains that regular sweeping cannot remove. Deep cleaning uses specialist solutions that break down accumulated oils and extract them from the surface substrate.
-
The second reason
Metal dust collects in gaps and corners
Fine metal particles and cut wiring accumulate around machinery and storage cabinet gaps. This debris poses a safety hazard and regular vacuum cleaners cannot reach these areas effectively.
-
The third reason
Industrial fluids leave stains and odours
Engine coolant and solvent residues pool on floors and discolour the surface with stubborn marks. Thorough cleaning removes these deposits completely and restores the original floor appearance.
The character of Kilo 14
Industrial area: workshops, warehouses and loading yards
Kilo 14 workshops combine modern industrial character with modest residential housing, and workers depend on clean floors and safe pathways to avoid slipping and accidents.
What the facility looks like when the crew leaves
Clear drains and unblocked grates
Every floor drain and grate is cleared of sediment and debris before the crew leaves.
Overhead surfaces free of settled dust
Rafters, beams, and high-shelf tops no longer carry dust loads that fall with vibration or air movement.
Machine surfaces and racks clean to the touch
Equipment exteriors and storage rack surfaces have been wiped and scrubbed, not just sprayed.
What our customers said
«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
«خدمة ممتازة.»
«ممتازين.»
Some of our work
Illustrative photographs. Our own job photographs go here as soon as the client approves them.
What is different about South Jeddah
South Jeddah is the working end of the city: the Islamic Port, the industrial city with its warehouses and workshops, and behind them older low rise districts such as Ghulail and Al Khumrah. The roads are built for lorries, and port and factory traffic runs through the night, so the dust that settles here is grey with diesel and metal filings rather than pale sand. Buildings are mostly older concrete with flat roofs and open stairwells that collect it. Sea humidity keeps it damp, and in summer it sets hard on ledges and cladding.
Nearby districts we cover
Questions worth asking first
Deep oil stains in concrete need specialist solutions that break down the oil before extraction. Deep cleaning reaches pore depth and removes old stains that previous cleaning attempts could not lift.
Yes. Removing fluid and oil residue eliminates the source of odour. A clean floor stays free from heavy industrial smells.
Deep cleaning requires temporary work stoppage to be thorough and safe. Scheduling with the team identifies the right time that does not disrupt production.
The crew protects electrical equipment and engines from water and solutions. Every machine is shielded during cleaning and stays dry and safe.
Time depends on the warehouse size, volume of deposits and machinery present. Initial assessment determines the expected duration with accuracy.
Heavy items that do not move easily do not need removal, but work paths and aisles must be clear of obstacles.
It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Kilo 14.
Racking and stored inventory do not need to move for most of the work.
Duration depends on floor area, ceiling height, rack density, and the condition of the facility going in.
Other services in Kilo 14
We also provide these services in Kilo 14.
