Water tank waterproofing in Al Sarawat, Jeddah

Al Sarawat is an industrial zone in far south Jeddah near Al Khumrah, dominated by large warehouses and workshops with scattered homes among wide industrial plots. Tanks here serve residents living within the industrial landscape. Heavy industrial dust carrying metal filings and machinery oil settles on rooftops. The water can become unsafe to drink from contamination alone. Waterproofing is essential here to prevent these specific contaminants from entering the supply.

Call now WhatsApp

Interior surfaces fully sealed
Food-safe coating materials
Cracks and gaps filled first
Inspected before handover

Why tank waterproofing protects your water supply

Al Sarawat lies on the western side of Al Khumrah, stretching between the Industrial City to the north and the southern corniche to the west. The vast majority of area is occupied by large warehouses and workshops built to civil defence standards.

Seal before a leak develops

In Al Sarawat, industrial contaminants enter the tank continuously through any crack, and waterproofing stops this constant inflow completely and preserves water safety.
Repair an existing slow drip

Seeping from an industrially contaminated tank becomes visibly obvious quickly because water turns dark grey from metal filings and becomes obviously unsafe.
Keep drinking water free of debris

Thermal stress combined with heavy industrial contaminants creates cumulative pressure on the tank, and cracks widen at a noticeably accelerated rate.
Reduce maintenance over time

Tanks in Al Sarawat require intensive protection against heavy industrial contamination, and waterproofing is the only effective solution to stop continuous toxic water pollution.

Everything included in the service

Tank drained of water
Walls scrubbed with brush
Surfaces dried before coating
Cracks and gaps sealed
Primer coat brushed on
Waterproofing coat brushed on
Second coat applied over first
Coating inspected before leaving

How the waterproofing job is carried out

Booking and access arrangement
Draining, cleaning, and drying
Sealing and coating
Inspection and handover

What changes about water tank waterproofing in Al Sarawat

Tanks in Al Sarawat rarely stay clean even when tightly sealed, and water always contains metallic and grey sediment that visible to the naked eye. For the whole method, see our water tank waterproofing service.

The first reason
Warehouses and workshops produce heavy industrial dust daily

Excavators, lorries and heavy equipment work continuously. The dust produced is extremely heavy and carries iron filings and machinery oil. This dust settles on rooftops and tanks and enters through any crack. Unlike light dust elsewhere, this sediment deposits immediately and covers the tank floor.
The second reason
Oil and fuel leaks from machinery contaminate water permanently

Warehouses store machinery oil and fuel, which spill and vaporise into the air mixed with dust. When this enters the tank, water becomes unsafe and develops a permanent oily smell. Cleaning may not remove the odour because oil leaves residue on walls. Waterproofing stops this source entirely.
The third reason
Sea humidity combined with industrial pollution accelerates decay

Al Sarawat is close to the southern corniche and the sea. Marine humidity raises air moisture levels and accelerates rust and corrosion. Tanks here face double pressure: industrial contaminants from above and sea moisture from below, both speeding deterioration.

Al Sarawat on the map

Al Sarawat sits about 3.5 km from Al Khumrah and about 4.5 km from Al Sarawriyah.

Open in Google Maps

What the tank looks like after

A sealed, smooth interior surface

The coating bonds to the concrete or fibreglass and fills any hairline cracks that were present.

No active leaks or seeping

Gaps that were allowing water to seep through the walls or base are filled and covered.

Food-safe lining throughout

Every applied material is rated safe for contact with drinking water.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»

Hesham ZayanAugust 2026 · Review on Google Maps

«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»

Bashar Al-MushaikhiJuly 2026 · Review on Google Maps

«خدمة ممتازة.»

Abdullah Al-GhamdiAugust 2026 · Review on Google Maps

«ممتازين.»

Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Some of our work

Illustrative photographs. Our own job photographs go here as soon as the client approves them.

The character of Al Sarawat

Industrial area: workshops, warehouses and loading yards

An industrial zone means the home is surrounded by contaminants from all directions. The tank faces continuous, heavy industrial pollution pressure. Waterproofing protects the tank from intense and relentless industrial contamination, and is essential for safe living in this zone.

Nearby districts we cover

Al Khumrah Al Sarawriyah Al Dahiyah

Questions worth asking first

Is water from the tank in Al Sarawat safe to drink without extra filtering?

Rarely. Industrial contaminants make the water unsafe to drink without treatment. Testing is essential before use. After cleaning and waterproofing, water becomes cleaner, but a simple tap filter helps remove any remaining fine sediment.

Does sea humidity affect waterproofing quality in Al Sarawat?

Yes, high humidity may slow drying time. The team plans work during lower humidity periods. Materials used are approved for damp environments and cure properly even in humid conditions.

Should the tank be cleaned multiple times in an industrial area?

Yes, before waterproofing, extremely thorough cleaning is necessary to remove all sediment and oil residue. This may take longer than cleaning in other districts because of the heavy contamination.

Does waterproofing stop rust forming on reinforcing steel in an industrial zone?

Waterproofing stops contaminants and moisture from entering, which are the main causes of rust. If rust has already started, sealing stops it from spreading further and accelerating.

How often must tanks be inspected in an industrial area like Al Sarawat?

Every three months is sensible initially. After a year of good waterproofing, six-monthly inspection is adequate. The team checks for new leakage signs and accumulating contamination.

Can the tank be sealed while industrial work continues around it daily?

Yes, but coordinating with the industrial activity nearby is helpful. The team works efficiently and protects the tank from new contamination during the waterproofing job itself.

How much does water tank waterproofing in Al Sarawat cost?

It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Sarawat.