Water tank waterproofing

Water tank waterproofing in Al Safa, Jeddah

Al Safa is an old, sprawling district bounded by two main roads that carry the city's heaviest traffic, and greasy engine soot from exhausts settles on tank surfaces and is baked hard by summer heat. This accelerates cracking, and water begins to carry traces of street contamination. Waterproofing here protects against faster-developing leaks that would otherwise contaminate the supply.

  • Interior surfaces fully sealed
  • Food-safe coating materials
  • Cracks and gaps filled first
  • Inspected before handover

Why tank waterproofing protects your water supply

The district stretches between Prince Majid Road, a busy general market, and King Fahd Road, a major transport artery. Old apartment blocks capture soot on their facades and rooftops, and the tanks above absorb the same pollution pressure.

  • Seal before a leak develops

    In Al Safa, soot may seal small cracks at the surface but does not stop internal seeping, and moisture continues to travel deep into the walls beneath the tank.

  • Repair an existing slow drip

    A slow leak in Al Safa may take months before damage shows, but by then structural harm from continuous dampness can be severe and expensive to repair.

  • Keep drinking water free of debris

    Summer expansion opens sealed cracks, and winter cooling draws them shut again, so over time each cycle widens them slightly, and leaks worsen with the seasons.

  • Reduce maintenance over time

    Old tanks in Al Safa need regular checking, but waterproofing renewal can add years to their safe working life without the cost and disruption of replacement.

Everything included in the service

  1. Tank drained of water

    Tank drained of water

  2. Walls scrubbed with brush

    Walls scrubbed with brush

  3. Surfaces dried before coating

    Surfaces dried before coating

  4. Cracks and gaps sealed

    Cracks and gaps sealed

  5. Primer coat brushed on

    Primer coat brushed on

  6. Waterproofing coat brushed on

    Waterproofing coat brushed on

  7. Second coat applied over first

    Second coat applied over first

  8. Coating inspected before leaving

    Coating inspected before leaving

How the waterproofing job is carried out

  1. Booking and access arrangement

  2. Draining, cleaning, and drying

  3. Sealing and coating

  4. Inspection and handover

What changes about water tank waterproofing in Al Safa

Tanks in this older quarter show signs of early leakage more often than in other districts, and the water develops an odd odour that ordinary cleaning cannot remove. For the whole method, see what water tank waterproofing involves.

  • The first reason

    Greasy soot accelerates cracking through uneven heating

    Exhaust soot from both main roads forms a dark, oily layer on exposed surfaces. This layer prevents even cooling of concrete below, so thermal stresses work unevenly and enlarge any existing cracks. The tank takes the same damage directly, and cracks spread faster than they would in a cleaner setting.

  • The second reason

    Ground floor shops suffer moisture from tanks above

    Most apartments sit above shops, and a leaking tank bleeds water down the interior walls. Shop owners report damp walls within months of a leak starting above. Waterproofing early stops this damage before it compounds and becomes difficult to repair.

  • The third reason

    Street pollution enters water through hairline gaps

    Dust and soot from the roads drift onto the rooftop and enter the tank through small cracks. Water absorbs a strange taste and smell that ordinary filters cannot remove. Cleaning alone fails if the cracks are not sealed first to stop new contamination.

The character of Al Safa

Mixed district: shops at street level with homes above them

Shops beneath flats mean that a leak carries additional contaminants downward: street dust and traces of commercial activity below. Sealing stops this polluted flow from entering homes above and keeps water cleaner.

What the tank looks like after

A sealed, smooth interior surface

The coating bonds to the concrete or fibreglass and fills any hairline cracks that were present.

No active leaks or seeping

Gaps that were allowing water to seep through the walls or base are filled and covered.

Food-safe lining throughout

Every applied material is rated safe for contact with drinking water.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
Hesham ZayanAugust 2026 · Review on Google Maps
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
Bashar Al-MushaikhiJuly 2026 · Review on Google Maps
«خدمة ممتازة.»
Abdullah Al-GhamdiAugust 2026 · Review on Google Maps
«ممتازين.»
Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Some of our work

Sofa cleaning
Sofa cleaning
Carpet and rug cleaning
Carpet and rug cleaning
Villa cleaning
Villa cleaning
Majlis and rest-house cleaning
Majlis and rest-house cleaning
Kitchen cleaning
Kitchen cleaning
Chandelier cleaning
Chandelier cleaning
Bathroom cleaning
Bathroom cleaning
Mattress cleaning
Mattress cleaning
Office cleaning
Office cleaning
Hotel and resort cleaning
Hotel and resort cleaning
Shopping centre cleaning
Shopping centre cleaning
Marble grinding and crystal polishing
Marble grinding and crystal polishing

Illustrative photographs. Our own job photographs go here as soon as the client approves them.

What is different about Central Jeddah

Central Jeddah is the densest part of the city. Around the historic core of Al Balad the streets are narrow, the blocks are old, and most buildings have shops at ground level with flats above, so stairwells open onto markets and workshops. The main arteries, Madinah Road, King Fahd Road and Palestine Street, carry the heaviest traffic in Jeddah, and their exhaust leaves a dark, greasy soot unlike the dry sand of the outskirts. Old render holds it, summer heat bakes it on, and restoration work in the old quarter adds stone dust.

Nearby districts we cover

Questions worth asking first

Because of the setting between two main roads, water may carry fine particles of dust and soot. Testing reveals whether contaminants are present. Waterproofing stops these contaminants from entering in the first place.

If damp walls are from direct tank leakage, they will dry gradually. Old walls may take time, but sealing stops new water from entering immediately. Existing moisture content will reduce over weeks as air circulation continues.

Yes, if there has been prior leakage, pipes should be checked for soundness. The leak may come from pipes rather than from the tank walls themselves. The team inspects everything before work begins and reports findings to you.

In Al Safa, because of road pollution, yearly inspection is reasonable. The team checks the exterior for new cracks around edges and seams, and confirms the seal remains intact under thermal stress.

Yes, in most cases removal is not necessary. The team drains and cleans it in position, then applies the waterproof coat from inside. This saves time and avoids the cost and disruption of lowering it.

Yes, approved materials for drinking water contact are used. They do not alter taste or odour. After full curing, water is safe to drink and remains so as long as the seal holds.

It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Safa.

The duration depends on the tank size and how long the interior needs to dry before coating.

No special preparation is needed on the household's side.

Need water tank waterproofing in Al Safa?

We reach Al Safa at a time we agree, and you get the full cost before we start.

Call WhatsApp