Water tank waterproofing in Al Rimal, Jeddah

Al Rimal is a subdivision at far south Jeddah within the same cluster of emerging outlying districts. It lies close to the Islamic Port and the industrial city, and heavy lorry traffic and factory operations leave soot that readily enters new rooftop tanks.

Call now WhatsApp

Interior surfaces fully sealed
Food-safe coating materials
Cracks and gaps filled first
Inspected before handover

Why tank waterproofing protects your water supply

A far south Jeddah subdivision with no named local roads, mosques or public facilities yet on current maps, lying close to where the regional Al Lith highway continues with minimal built development so far.

Seal before a leak develops

Port and heavy lorry soot enters new tanks through cracks, and waterproofing seals these gaps to protect against continuous industrial contamination reaching drinking water.
Repair an existing slow drip

Cleaning existing greasy soot is essential before waterproofing because heavy deposits can stop sealing material from adhering well to new tank concrete walls.
Keep drinking water free of debris

Summer thermal expansion may widen cracks especially in an industrial environment where soot weakens new concrete. Waterproofing breaks this cycle of damage.
Reduce maintenance over time

Resealing may be necessary every five to seven years in Al Rimal because heavy industrial soot, ongoing construction, and new concrete stress the protective coating faster.

Everything included in the service

Tank drained of water
Walls scrubbed with brush
Surfaces dried before coating
Cracks and gaps sealed
Primer coat brushed on
Waterproofing coat brushed on
Second coat applied over first
Coating inspected before leaving

How the waterproofing job is carried out

Booking and access arrangement
Draining, cleaning, and drying
Sealing and coating
Inspection and handover

What changes about water tank waterproofing in Al Rimal

Greasy soot from the port and heavy lorry traffic slides easily through cracks in new tanks and dirties the water supply quickly. For the whole method, see what water tank waterproofing involves.

The first reason
Port and factory soot pollutes new tanks rapidly

Your closeness to the Islamic Port and industrial city means constant heavy lorry traffic. Soot from engines and industrial work enters new rooftop tanks quickly before building is complete.
The second reason
Building will continue for years in this emerging subdivision

Al Rimal is in its early stages and construction will run for many years. Your tank faces both construction dust and industrial soot, and early waterproofing protects against this dual exposure.
The third reason
New concrete absorbs heavy soot deeply and quickly

New concrete is porous and heavy greasy soot penetrates deeply into its structure. Cleaning soot from a tank this young can be difficult, so early waterproofing stops the soot from entering initially.

The character of Al Rimal

New development: ongoing construction and vacant plots between the homes

In a new subdivision beside the port and factories, the new rooftop tank faces double industrial pressure: construction dust from the emerging neighbourhood and lorry soot from the port zone. Early waterproofing protects against this compounded exposure.

What the tank looks like after

A sealed, smooth interior surface

The coating bonds to the concrete or fibreglass and fills any hairline cracks that were present.

No active leaks or seeping

Gaps that were allowing water to seep through the walls or base are filled and covered.

Food-safe lining throughout

Every applied material is rated safe for contact with drinking water.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»

Hesham ZayanAugust 2026 · Review on Google Maps

«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»

Bashar Al-MushaikhiJuly 2026 · Review on Google Maps

«خدمة ممتازة.»

Abdullah Al-GhamdiAugust 2026 · Review on Google Maps

«ممتازين.»

Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Some of our work

Illustrative photographs. Our own job photographs go here as soon as the client approves them.

What is different about South Jeddah

South Jeddah is the working end of the city: the Islamic Port, the industrial city with its warehouses and workshops, and behind them older low rise districts such as Ghulail and Al Khumrah. The roads are built for lorries, and port and factory traffic runs through the night, so the dust that settles here is grey with diesel and metal filings rather than pale sand. Buildings are mostly older concrete with flat roofs and open stairwells that collect it. Sea humidity keeps it damp, and in summer it sets hard on ledges and cladding.

Nearby districts we cover

Al Mawj Al Marsa Al Rabiyah

Questions worth asking first

Does greasy port and lorry soot enter new tanks quickly in Al Rimal?

Yes, lorry traffic from the port and factories runs continuously, and greasy soot enters new rooftop tanks rapidly before building ends.

When is the best time to waterproof a tank in a subdivision close to the port?

Before moving in, or even before the tank's first water fill. A new subdivision beside the port means continuous industrial soot exposure.

Do airport dust and street pollutants enter tanks easily, or is sea salt the greater risk?

Both enter, but greasy soot from heavy lorries is more dangerous due to its weight and oiliness. Waterproofing protects against soot, salt and dust all together.

Can microscopic metal particles enter an unsealed new tank from the port area?

Yes, heavy lorry traffic and industrial work release fine metal particles that enter unsealed tanks readily. Waterproofing stops this metallic contamination.

Does heavy lorry traffic from the port damage the waterproofing seal after it hardens?

No, traffic does not harm the seal once fully cured. Ensuring complete tank dryness before waterproofing is very important due to high humidity here.

What should we arrange before the waterproofing team arrives at a port adjacent site?

Fully drain the tank and pre clean greasy soot with a dry brush, then with water. Multiple cleaning passes may be needed because heavy soot clings strongly and humidity is high here.

How much does water tank waterproofing in Al Rimal cost?

It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Rimal.