Water tank waterproofing

Water tank waterproofing in Al Nahdah, Jeddah

Al Nahdah is a mixed district stretching inland from the Corniche, with dense commercial activity on the main streets and residential blocks and villas behind. High humidity from the sea mixes with dust from heavy traffic, and rooftop tanks face a dual challenge: salt and marine moisture from one direction, plus traffic pollution and road dust from the other. Leaks here happen faster than in residential districts alone.

  • Interior surfaces fully sealed
  • Food-safe coating materials
  • Cracks and gaps filled first
  • Inspected before handover

Why tank waterproofing protects your water supply

Al Nahdah runs between King Abdulaziz Road and Prince Sultan Road along Hira Street, close to the waterfront, with dense commercial activity, residences, villas, medical centres and schools all using the same water supply.

  • Seal before a leak develops

    Al Nahdah, close to the coast and with heavy traffic, means tank leakage can cause double damage: moisture from the sea and pollution from the road at once.

  • Repair an existing slow drip

    Fixing an existing leak in Al Nahdah requires thorough cleaning to remove salt, dust and oily residues from tank walls before fresh robust waterproofing is applied.

  • Keep drinking water free of debris

    Clean, safe drinking water in Al Nahdah requires waterproofing that guards against salt, humidity, dust and pollutants together.

  • Reduce maintenance over time

    Renewing a tank by waterproofing rather than replacement saves residents and owners significant cost, especially in a mixed-use district where maintenance can be complex.

Everything included in the service

  1. Tank drained of water

    Tank drained of water

  2. Walls scrubbed with brush

    Walls scrubbed with brush

  3. Surfaces dried before coating

    Surfaces dried before coating

  4. Cracks and gaps sealed

    Cracks and gaps sealed

  5. Primer coat brushed on

    Primer coat brushed on

  6. Waterproofing coat brushed on

    Waterproofing coat brushed on

  7. Second coat applied over first

    Second coat applied over first

  8. Coating inspected before leaving

    Coating inspected before leaving

How the waterproofing job is carried out

  1. Booking and access arrangement

  2. Draining, cleaning, and drying

  3. Sealing and coating

  4. Inspection and handover

What changes about water tank waterproofing in Al Nahdah

Tanks in Al Nahdah face both high marine humidity from one side and dust from congested roads on the other simultaneously. For the whole method, see our water tank waterproofing service.

  • The first reason

    Sea humidity mixes with traffic pollutants from busy roads

    In Al Nahdah, high humidity from the nearby sea combines with smoke and dust particles from heavy traffic flow. This mixture penetrates cracks and creates an environment that accelerates both corrosion and leaking together, doubling the rate of deterioration.

  • The second reason

    Sea salt settles while road dust adheres due to dampness

    Salt spray from the sea and oily particles from vehicle exhaust settle together on tank walls. This creates uneven protective layers that fail and allow water to seep through them quickly, mixing contaminated air and marine salt in one corrosive combination.

  • The third reason

    Mixed commercial and residential use increases tank pressure continuously

    Al Nahdah is mixed use with both shops and homes, so tanks serve employees, visitors and residents together. High consumption and constant pressure add stress to walls and accelerate crack formation faster than residential areas alone.

Landmarks of Al Nahdah

Work is easily arranged in Al Nahdah via Hira Street, which provides direct access for the team and equipment to buildings, and Al Nahdah Park offers a clear local landmark for precise building location.

  • Hira Street
  • King Abdulaziz Road
  • Prince Sultan Road
  • Hira Plaza
  • Al Nahdah Park
  • Umar ibn Al Khattab Mosque

What the tank looks like after

A sealed, smooth interior surface

The coating bonds to the concrete or fibreglass and fills any hairline cracks that were present.

No active leaks or seeping

Gaps that were allowing water to seep through the walls or base are filled and covered.

Food-safe lining throughout

Every applied material is rated safe for contact with drinking water.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
Hesham ZayanAugust 2026 · Review on Google Maps
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
Bashar Al-MushaikhiJuly 2026 · Review on Google Maps
«خدمة ممتازة.»
Abdullah Al-GhamdiAugust 2026 · Review on Google Maps
«ممتازين.»
Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Some of our work

Sofa cleaning
Sofa cleaning
Carpet and rug cleaning
Carpet and rug cleaning
Villa cleaning
Villa cleaning
Majlis and rest-house cleaning
Majlis and rest-house cleaning
Kitchen cleaning
Kitchen cleaning
Chandelier cleaning
Chandelier cleaning
Bathroom cleaning
Bathroom cleaning
Mattress cleaning
Mattress cleaning
Office cleaning
Office cleaning
Hotel and resort cleaning
Hotel and resort cleaning
Shopping centre cleaning
Shopping centre cleaning
Marble grinding and crystal polishing
Marble grinding and crystal polishing

Illustrative photographs. Our own job photographs go here as soon as the client approves them.

What is different about West Jeddah

West Jeddah is the Corniche and the districts immediately behind it: a front line of glass towers and hotels on the waterfront, then older apartment streets and villa blocks inland. The building stock is a mix of ages, from concrete flats of the earlier expansion to new high rise on reclaimed ground. The sea wind is the constant here, carrying salt spray onto facades in every season and leaving a white bloom on rendered walls and a fog on glass. In humid summer months that film turns sticky and holds dust from the busy coastal road.

Nearby districts we cover

Questions worth asking first

Yes, significantly. Salt and humidity cause corrosion, and damp dust sticks to walls and allows moisture to concentrate and seep through, creating a combined corrosive effect.

Yes. The combination of sea humidity and road pollutants causes accelerated corrosion. Tanks here may need early waterproofing sooner than those far from the coast and congested roads.

Yes. High consumption and repeated fill-drain cycles place continuous pressure on walls. In Al Nahdah, this pressure combines with salt and humidity, accelerating crack formation.

Cleaning provides temporary relief only. Without waterproofing, salt and dust return with the wind and humidity, and existing cracks allow new contamination to enter constantly.

Yes. High night humidity from proximity to the sea encourages rapid algal growth. Unprotected tanks become ideal growing medium for algae and microbes.

After thorough cleaning and sealing, the smell disappears completely. Water becomes clean and odourless from the first use of the tank after waterproofing.

It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Nahdah.

The duration depends on the tank size and how long the interior needs to dry before coating.

No special preparation is needed on the household's side.

Need water tank waterproofing in Al Nahdah?

We reach Al Nahdah at a time we agree, and you get the full cost before we start.

Call WhatsApp