Water tank waterproofing in Al Amwaj, Jeddah

Al Amwaj is a northern coastal district with modern villas and residential compounds where salt air and high humidity enter tanks through small cracks continuously. Waterproofing here prevents rapid internal rust of the steel structure and protects drinking water from salt taste before any visible leak appears on the ceiling.

Call now WhatsApp

Interior surfaces fully sealed
Food-safe coating materials
Cracks and gaps filled first
Inspected before handover

Why tank waterproofing protects your water supply

A seafront area between Obhur Road and Prince Abdulmajeed Road where salt particles constantly settle on the roof surface and permeate through hairline cracks into the water tank interior.

Seal before a leak develops

Salt and coastal moisture accelerate crack formation, so early waterproofing protects the building shell from internal oxidation and structural damage over time.
Repair an existing slow drip

Slow seepage allows salt to enter silently without visible drips, making regular inspection vital to detect water quality change before it worsens.
Keep drinking water free of debris

Salt deposits on the tank interior and enters through thermal expansion and contraction cycles, so waterproofing shields against this repeated stress.
Reduce maintenance over time

An older tank in Al Amwaj may continue serving well after waterproofing instead of replacement, provided the cracks remain surface-level and the shell is still sound.

Everything included in the service

Tank drained of water
Walls scrubbed with brush
Surfaces dried before coating
Cracks and gaps sealed
Primer coat brushed on
Waterproofing coat brushed on
Second coat applied over first
Coating inspected before leaving

How the waterproofing job is carried out

Booking and access arrangement
Draining, cleaning, and drying
Sealing and coating
Inspection and handover

What changes about water tank waterproofing in Al Amwaj

Tanks here show internal rust formation much faster than in inland districts, and salt flavour changes the water well before the first drip becomes visible underneath. For the whole method, see water tank waterproofing in detail.

The first reason
Salt and humidity accelerate metal corrosion

The coastal air carries fine salt particles that settle on the roof and enter the tank through micro-cracks. Inside the tank, salt combines with constant moisture and corrodes the steel reinforcement at an unusually rapid rate. Waterproofing seals these entry points and shields the metal structure from accelerated oxidation and structural weakening.
The second reason
Water taste changes before the first visible leak

Householders notice a faint salt flavour in the drinking water before any ceiling drips appear. This signals salt is entering through hairline fractures too small to weep visibly. Sealing the interior surfaces restores water to its normal taste and stops further salt ingress at source.
The third reason
Foundations and columns degrade from inside

Continuous salt-laden moisture penetrates the concrete shell and weakens it gradually over years. Interior waterproofing stops salt and moisture at the tank surface before they reach the building structure beneath. This preserves structural integrity and extends the lifespan of the whole installation.

The character of Al Amwaj

Coastal area: high humidity and salt air through the year

Coastal areas present specific challenges: salt enters the tank from the air and deposits with humidity, corroding metals rapidly. Waterproofing here is not optional but essential to protect both tank and building structure from accelerated corrosion and deterioration.

What the tank looks like after

A sealed, smooth interior surface

The coating bonds to the concrete or fibreglass and fills any hairline cracks that were present.

No active leaks or seeping

Gaps that were allowing water to seep through the walls or base are filled and covered.

Food-safe lining throughout

Every applied material is rated safe for contact with drinking water.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»

Hesham ZayanAugust 2026 · Review on Google Maps

«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»

Bashar Al-MushaikhiJuly 2026 · Review on Google Maps

«خدمة ممتازة.»

Abdullah Al-GhamdiAugust 2026 · Review on Google Maps

«ممتازين.»

Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Some of our work

Illustrative photographs. Our own job photographs go here as soon as the client approves them.

Landmarks of Al Amwaj

Obhur Road and Prince Abdulmajeed Road mark the boundaries of Al Amwaj, and the team reaches properties easily via these main thoroughfares. SOL Beach Resort serves as a clear landmark identifying the northern coastal position of the district.

Obhur Road
Prince Abdulmajeed Road
Prince Abdullah Al Faisal Street
SOL Beach Resort

Nearby districts we cover

Al Lulu Al Shiraa Abhur North

Questions worth asking first

Does salt from coastal air cause extremely rapid rust inside the tank?

Yes. Salt combined with constant humidity corrodes steel reinforcement much faster than inland areas see. In Al Amwaj, visible rust may appear within one or two years instead of five. Waterproofing stops this entirely by sealing the tank from external salt sources.

When does salt flavour first appear in the drinking water?

Often before any visible dripping occurs. A faint salt taste means microscopic particles are entering through hairline cracks. This early warning shows the tank needs sealing before the leak becomes a structural problem.

Should the tank be inspected regularly after waterproofing?

A good seal protects for many years, but annual inspection confirms the coating remains effective. In a coastal area like Al Amwaj, yearly checks are sensible to catch any minor damage early.

Does waterproofing completely block salt entry into the tank?

Yes. The sealed interior surfaces create a barrier against water and salt simultaneously. After waterproofing, the tank is isolated from external pollutants and sea salt reaching the stored water.

How long does sealing a recently built tank in Al Amwaj take?

A newer tank takes less time because it is clean and free of sediment accumulation. Cleaning, drying and sealing proceed more efficiently, shortening the total job duration.

Is drinking water safe immediately after waterproofing is finished?

The materials used are approved for drinking water contact and permitted in household tanks. It is sensible to rinse the tank once before returning to full use to remove any dust or residue from the application.

How much does water tank waterproofing in Al Amwaj cost?

It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Amwaj.