Post-construction cleaning

Post-construction cleaning in Al Karamah, Jeddah

Al Karamah is a mixed district where shops occupy ground floors and flats sit directly above them. Post-construction cleaning here means dealing with two types of contamination together: the heavy industrial dust that drifts from Al Lith Road and the fine powder that settles on furnishings and fabrics in the upper flats.

  • Debris, dust and grout haze
  • Staged removal, surface by surface
  • New builds and renovations
  • Ready for landlord inspection

Why construction dust needs more than one pass

Al Karamah sits on the eastern edge of south Jeddah, served directly by Al Lith Road and the Middle Ring Road, which means constant heavy traffic and diesel-grey dust settling on every surface.

  • Sequence matters as much as effort

    A flat above a shop is ready to occupy only after the entire building is cleaned from outside inward, not the other way around.

  • Grout haze hardens quickly if left

    Shop glass and hardware around doors need protection from diesel dust that returns quickly unless washed daily in the first weeks.

  • Upper surfaces re-soil finished floors

    Cement residue from commercial construction is denser and harder to remove than residue inside the flat, and may need targeted chemical treatment.

  • Glass and film removed at the right moment

    Diesel dust infiltrates air conditioning filters in the upper flat through the shared foundation and open ventilation in the shop below.

What is included in the clean

  1. Removing construction debris and packaging

    Removing construction debris and packaging

  2. Vacuuming heavy dust from all surfaces

    Vacuuming heavy dust from all surfaces

  3. Scraping paint and cement off glass

    Scraping paint and cement off glass

  4. Peeling protective film off new fixtures

    Peeling protective film off new fixtures

  5. Wiping grout haze from tile floors

    Wiping grout haze from tile floors

  6. Cleaning dust from sockets and fittings

    Cleaning dust from sockets and fittings

  7. Wiping paint splatter from walls

    Wiping paint splatter from walls

  8. Mopping floors after overhead work finishes

    Mopping floors after overhead work finishes

How the job runs from booking to handover

  1. Site walk and scope

  2. Coarse debris removal

  3. Staged dust and surface clean

  4. Floor wash and handover check

What changes about post-construction cleaning in Al Karamah

Diesel dust from lorries bonds to glass and metal far more stubbornly than ordinary construction dust, and requires a different washing approach than districts distant from main roads. For the whole method, see the full post-construction cleaning page.

  • The first reason

    Shops and flats require separate cleaning sequences

    Cleaning a ground floor shop and the flat above it are completely different jobs. Oil and soot from shop activities rise into the flat on air currents, and cleaning the flat first means redoing it once the shop below is finished and airborne soot has settled into the newly cleaned surfaces.

  • The second reason

    Heavy dust hardens on metal and glass surfaces

    Diesel dust from Al Lith Road carries metal particles and oils that make it far harder to remove than ordinary dust. Left on glass or steel for a week, it hardens into a film that needs chemical treatment to shift.

  • The third reason

    Sea humidity and salt from the nearby port

    Al Karamah is close to the Islamic Port, and sea humidity and salt infiltrate the building. New cement and paint absorb and hold moisture, so cleaning here includes thorough drying to prevent salt stains from re-appearing after move-in.

The character of Al Karamah

Mixed district: shops at street level with homes above them

In a mixed district, the shop and the flat above it share the same foundation and walls. Cleaning one without the other means repeating the work: oil and soot from below rises to the flat, and dust from above falls back to the shop on air currents.

What the property looks like at handover

Glass clear of paint and film

Every pane is scraped free of cement splatter and paint drops, and protective film is fully removed.

Tile joints free of grout haze

Cement haze is removed from tile floors before it fully cures.

Sockets and grilles wiped clean

Fittings, sockets and AC grilles are wiped so no fine dust is left to redistribute once the property is occupied.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
Hesham ZayanAugust 2026 · Review on Google Maps
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
Bashar Al-MushaikhiJuly 2026 · Review on Google Maps
«خدمة ممتازة.»
Abdullah Al-GhamdiAugust 2026 · Review on Google Maps
«ممتازين.»
Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Some of our work

Sofa cleaning
Sofa cleaning
Carpet and rug cleaning
Carpet and rug cleaning
Villa cleaning
Villa cleaning
Majlis and rest-house cleaning
Majlis and rest-house cleaning
Kitchen cleaning
Kitchen cleaning
Chandelier cleaning
Chandelier cleaning
Bathroom cleaning
Bathroom cleaning
Mattress cleaning
Mattress cleaning
Office cleaning
Office cleaning
Hotel and resort cleaning
Hotel and resort cleaning
Shopping centre cleaning
Shopping centre cleaning
Marble grinding and crystal polishing
Marble grinding and crystal polishing

Illustrative photographs. Our own job photographs go here as soon as the client approves them.

What is different about South Jeddah

South Jeddah is the working end of the city: the Islamic Port, the industrial city with its warehouses and workshops, and behind them older low rise districts such as Ghulail and Al Khumrah. The roads are built for lorries, and port and factory traffic runs through the night, so the dust that settles here is grey with diesel and metal filings rather than pale sand. Buildings are mostly older concrete with flat roofs and open stairwells that collect it. Sea humidity keeps it damp, and in summer it sets hard on ledges and cladding.

Nearby districts we cover

Questions worth asking first

Yes, fundamentally. Diesel leaves a greasy black film on glass and metal that bonds hard. Cleaning glass alone accomplishes nothing if the external facade, street frontage and boundary wall have not been cleaned first.

Absolutely. Oil and soot from a newly opened shop rise into the flat within days. Cleaning the flat first means the work must be redone a week later when shop emissions have settled into the fresh surfaces.

Moisture itself does not return, but salt settles again gradually on the sea breeze. Thorough drying and fans during cleaning greatly reduce this effect.

Yes, if space exists. Shop front, external passage and boundary wall are all cleaned as one unit, because diesel dust reaches the foundation and external floor surfaces.

Yes, oil and metal removal products differ from glass cleaners. Glass alone cannot shift sulphur and metal particles embedded in aluminium and steel.

It will gradually soil if the shop is busy. Regular cleaning of the external facade and ground floors prevents oil from rising quickly into the flat again.

It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Karamah.

The clean is most efficient after all trades have finished and left the site.

Power and water should be connected at the property.

Need post-construction cleaning in Al Karamah?

We reach Al Karamah at a time we agree, and you get the full cost before we start.

Call WhatsApp