Marble grinding and crystal polishing in Wadi Mareekh, Jeddah
Al Taysir is experiencing rapid residential growth with successive construction projects, and floors in new villas and apartment buildings are exposed to fine dust and building debris daily. Marble and granite in these modern homes lose their shine due to accumulated dust and moisture from ongoing construction. Crystal grinding restores the original lustre and protects floors against future damage.
- Marble, granite and terrazzo
- Progressive diamond-pad grinding
- Hotels, malls and lobbies
- Finish locked into stone
Why grinding must come before polishing
The area is undergoing continuous residential expansion with new developments, and floors need deep cleaning to remove construction dust that settles from neighbouring projects.
-
Worn lobbies and entrance floors
Successive building projects in Al Taysir emit fine dust that penetrates new homes, causing rapid accumulation on floors.
-
Post-construction stone preparation
Moisture from excavation and concrete pouring makes dust stick to marble rather than slide easily, requiring deeper cleaning.
-
Scratched or acid-etched stone
Crystal polishing extracts dust and moisture from within the stone's pores and restores a lustrous, safe surface for new families.
-
Ongoing maintenance schedule
Regular polishing every six months in the early years preserves floor quality and prevents permanent damage from ongoing accumulation.
What every job includes
-
Crew inspects marble surface condition
-
Furniture and adjacent edges covered
-
Coarse diamond discs grind the marble
-
Fine diamond pads hone the surface
-
Grinding slurry vacuumed and removed
-
Crystal powder spread across surface
-
Heavy rotary machine burnishes the powder
-
Edges and corners polished by hand
How a marble polishing job runs
-
Surface survey and setup
-
Coarse and fine grinding
-
Slurry removal and crystal application
-
Edge detail and handover
What changes about marble grinding and crystal polishing in Wadi Mareekh
Newly built villas and apartments in Al Taysir need more frequent polishing in their early years because construction dust travels from nearby foundations into the interior. For the whole method, see the full marble grinding and crystal polishing page.
-
The first reason
Construction dust enters new homes from nearby sites
New neighbouring projects emit fine particles that penetrate windows and doors. This dust settles on floors and furniture and embeds in marble pores. Surface cleaning removes only what sits on top, while deep grinding extracts the trapped dust completely.
-
The second reason
Building moisture traps dirt on surfaces
Excavation and concrete pouring raise humidity levels across the area. This moisture makes dust stick to floors rather than slide. Polishing removes both the moisture and embedded dirt, leaving the surface dry and lustrous.
-
The third reason
New villas and apartments need early-stage care
Modern floors require protection during the initial building phase before construction in the area stabilises. Regular polishing preserves stone quality and prevents permanent damage from accumulated dust.
The character of Wadi Mareekh
New development: ongoing construction and vacant plots between the homes
Al Taysir is a modern, aspirational area where new families want to maintain the quality of their villas and buildings. Clean, lustrous floors reflect care and pride in the home.
The surface you are left with
A true mirror finish
The surface reflects light cleanly because the stone itself is flat, not because a coating sits on top.
Edges as polished as the field
Hand-detailing at skirting lines, doorframes and column bases matches the field polish.
No residue left on site
Grinding produces a wet slurry that is vacuumed and removed before the polishing stage begins.
What our customers said
«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
«خدمة ممتازة.»
«ممتازين.»
Some of our work
Illustrative photographs. Our own job photographs go here as soon as the client approves them.
What is different about South Jeddah
South Jeddah is the working end of the city: the Islamic Port, the industrial city with its warehouses and workshops, and behind them older low rise districts such as Ghulail and Al Khumrah. The roads are built for lorries, and port and factory traffic runs through the night, so the dust that settles here is grey with diesel and metal filings rather than pale sand. Buildings are mostly older concrete with flat roofs and open stairwells that collect it. Sea humidity keeps it damp, and in summer it sets hard on ledges and cladding.
Questions worth asking first
An initial polish after one or two months removes construction dust accumulated during moving. Then, polishing every six months keeps floors clean and lustrous.
Yes, deep grinding extracts moisture and light stains from the stone surface. Deep stains may require additional treatment or specialist assessment.
Yes, polishing is completely safe on new floors. In fact, early polishing protects the stone from dust and moisture accumulation in the early years.
Polishing every three months removes new dust quickly. Improving sealing and ventilation reduces dust entry into the home.
Polishing strengthens the surface and reduces new contaminant absorption. Lasting protection requires regular cleaning and periodic repolishing based on exposure levels.
Each stone type requires a different polishing method. Initial inspection identifies the stone in the villa or building, then the appropriate technique is selected.
It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Wadi Mareekh.
Duration depends on the stone condition and the surface area.
Furniture that cannot be moved by the crew should be moved before arrival.
Other services in Wadi Mareekh
We also provide these services in Wadi Mareekh.
