Marble grinding and crystal polishing in Al Yusr, Jeddah
Al Yusr is a newly developed district in north Jeddah where villas and residential projects rise with marble and granite floors throughout. Fresh construction and heavy building activity leave fine sand and dust embedded in the stone. Crystal polishing grinds away the dull surface layer and restores the natural lustre and depth of the stone.
- Marble, granite and terrazzo
- Progressive diamond-pad grinding
- Hotels, malls and lobbies
- Finish locked into stone
Why grinding must come before polishing
The new district features villas with high-grade marble flooring, and ongoing construction deposits fine dust and stone particles on surfaces before handover.
-
Worn lobbies and entrance floors
Marble and granite emerging from quarries in new Al Yusr villas has a raw surface that needs professional grinding to reveal true colour and the stone's natural depth.
-
Post-construction stone preparation
Fine dust from neighbouring construction sites works into the stone's pores, and surface cleaning alone cannot remove it; diamond grinding extracts it completely.
-
Scratched or acid-etched stone
Marble floors that are ground properly stay clean longer and resist stains and dirt naturally without thick chemical coatings.
-
Ongoing maintenance schedule
New villas in the district benefit from polishing once every one to two years to restore lustre, especially in high-traffic areas like entrances and corridors.
What every job includes
-
Crew inspects marble surface condition
-
Furniture and adjacent edges covered
-
Coarse diamond discs grind the marble
-
Fine diamond pads hone the surface
-
Grinding slurry vacuumed and removed
-
Crystal powder spread across surface
-
Heavy rotary machine burnishes the powder
-
Edges and corners polished by hand
How a marble polishing job runs
-
Surface survey and setup
-
Coarse and fine grinding
-
Slurry removal and crystal application
-
Edge detail and handover
What changes about marble grinding and crystal polishing in Al Yusr
New marble floors in Al Yusr lose their initial sheen rapidly due to fine construction dust and heavy foot traffic during the moving and furnishing phase. For the whole method, see how we approach marble grinding and crystal polishing.
-
The first reason
Fine dust obscures the stone's natural character
Ongoing construction in the district generates fine particles that settle on marble and granite surfaces. This dust clogs the natural pores in the stone and creates a dull, lifeless appearance even with daily cleaning.
-
The second reason
Crystal grinding reaches deep into the stone
Diamond-pad grinding does not add a surface coating; it removes the damaged upper layer and exposes clean marble beneath. The process cuts into the pores and extracts dirt trapped deep within.
-
The third reason
The result is natural lustre that lasts longer
After polishing, the floor reflects light naturally without any artificial layer. Clean stone stays lustrous longer and resists dirt buildup more effectively.
The character of Al Yusr
New development: ongoing construction and vacant plots between the homes
Al Yusr is a newly formed district with young families and professionals occupying villas with high ceilings and spacious marble and granite floors. The district grows rapidly and ongoing construction leaves marks on freshly laid surfaces.
The surface you are left with
A true mirror finish
The surface reflects light cleanly because the stone itself is flat, not because a coating sits on top.
Edges as polished as the field
Hand-detailing at skirting lines, doorframes and column bases matches the field polish.
No residue left on site
Grinding produces a wet slurry that is vacuumed and removed before the polishing stage begins.
What our customers said
«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
«خدمة ممتازة.»
«ممتازين.»
Some of our work
Illustrative photographs. Our own job photographs go here as soon as the client approves them.
What is different about North Jeddah
The northern sector of Jeddah is the city's newest ground: gated villa schemes, low apartment blocks and wide boulevards laid out over the last stretch of open land before Dhahban and Thuwal. Much of it is still being built, so construction dust from cleared plots and half finished streets is the defining problem, drifting across finished homes on the afternoon wind and settling as a pale grit on car ports and window ledges. Summer brings the heaviest of it, while the short winter rains turn the same dust into streaks down cladding and glass.
Nearby districts we cover
Questions worth asking first
Right after construction is complete and initial cleaning is done. New marble needs one polish before occupancy to remove construction residue and dust locked in the pores.
No. Grinding works with the stone's nature. Diamond pads clean and polish only; they leave no chemical coating on the surface.
It depends on foot traffic and use. Residential villas typically need polishing once every one to two years to restore lustre and protective qualities.
Surface stains disappear with grinding. Fine scratches become less visible once the entire floor shines uniformly.
Yes. The crew needs open space and good ventilation. It is best if residents are absent until grinding and drying are fully complete.
Grinding removes the upper layer and reveals clean stone. Burnishing follows and applies a simple protective solution that enhances lustre and guards against dirt.
It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Yusr.
Duration depends on the stone condition and the surface area.
Furniture that cannot be moved by the crew should be moved before arrival.
Other services in Al Yusr
We also provide these services in Al Yusr.
