Marble grinding and crystal polishing in Al Mursalat, Jeddah
Al Mursalat is a residential district in far southeast Jeddah, predominantly home to families and employees in multi-storey apartment buildings. Marble floors in these units face heavy daily use, and repeated cleaning and foot traffic leave them dull and rough. Diamond grinding restores the stone's natural shine and protects floors from accelerated wear in high-traffic settings.
- Marble, granite and terrazzo
- Progressive diamond-pad grinding
- Hotels, malls and lobbies
- Finish locked into stone
Why grinding must come before polishing
The district sits near the Bahrah boundary and the Jeddah Makkah Expressway, with apartment buildings housing many residents and floors experiencing heavy concentrated use.
-
Worn lobbies and entrance floors
High-density residential buildings in Al Mursalat experience heavy ongoing use, requiring more frequent grinding for floor maintenance.
-
Post-construction stone preparation
Local marble and granite in apartments may be of relatively lower grade, and grinding must be careful to avoid damaging the surface.
-
Scratched or acid-etched stone
Severely worn floors may contain small pits or bubbles, and grinding improves appearance but may not eliminate all structural flaws.
-
Ongoing maintenance schedule
Burnishing after grinding produces a brilliant, safe and easy-to-clean surface, improving overall apartment living quality.
What every job includes
-
Crew inspects marble surface condition
-
Furniture and adjacent edges covered
-
Coarse diamond discs grind the marble
-
Fine diamond pads hone the surface
-
Grinding slurry vacuumed and removed
-
Crystal powder spread across surface
-
Heavy rotary machine burnishes the powder
-
Edges and corners polished by hand
How a marble polishing job runs
-
Surface survey and setup
-
Coarse and fine grinding
-
Slurry removal and crystal application
-
Edge detail and handover
What changes about marble grinding and crystal polishing in Al Mursalat
Floors in Al Mursalat apartments lose their shine faster than in lower-traffic areas due to intensive use and high resident density. For the whole method, see the full marble grinding and crystal polishing page.
-
The first reason
Heavy use accelerates floor wear
Residential units in apartment buildings see constant movement from families, children and visitors. This traffic leaves a dull film and speeds wear on the stone. Regular grinding halts this wear and preserves the floors.
-
The second reason
Rough surfaces cause cleaning and safety problems
Dull rough floors trap dirt and stains easily and become slippery when wet. Marble grinding smooths the surface, making cleaning easier, faster and safer.
-
The third reason
Burnishing extends the floor's working life
Periodic grinding protects floors from reaching a worn state requiring full replacement. Investment in grinding saves money over time.
Al Mursalat on the map
Al Mursalat sits about 2 km from Al Huthaifat and about 3 km from Al Atheer.
Open in Google MapsThe surface you are left with
A true mirror finish
The surface reflects light cleanly because the stone itself is flat, not because a coating sits on top.
Edges as polished as the field
Hand-detailing at skirting lines, doorframes and column bases matches the field polish.
No residue left on site
Grinding produces a wet slurry that is vacuumed and removed before the polishing stage begins.
What our customers said
«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
«خدمة ممتازة.»
«ممتازين.»
Some of our work
Illustrative photographs. Our own job photographs go here as soon as the client approves them.
What is different about South Jeddah
South Jeddah is the working end of the city: the Islamic Port, the industrial city with its warehouses and workshops, and behind them older low rise districts such as Ghulail and Al Khumrah. The roads are built for lorries, and port and factory traffic runs through the night, so the dust that settles here is grey with diesel and metal filings rather than pale sand. Buildings are mostly older concrete with flat roofs and open stairwells that collect it. Sea humidity keeps it damp, and in summer it sets hard on ledges and cladding.
Nearby districts we cover
Questions worth asking first
Daily cleaning maintains everyday tidiness. Floor grinding should happen every two to three years depending on usage level and high resident occupancy.
Yes, a polished smooth surface makes cleaning much easier. Dirt and stains do not cling to a smooth surface as readily.
Grinding requires the unit to be closed and work to be focused. The crew minimises noise, and the work takes roughly one day only.
Even severely worn floors can be restored through grinding. Initial inspection determines the stone's condition and appropriate pad grade.
Yes, polished floors are completely safe and smooth to walk on even when wet. Proper grinding produces a balanced surface between smoothness and safety.
Avoid heavy foot traffic and furniture movement for several hours. Do not use acidic or harsh cleaners in the first week after polishing.
It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Mursalat.
Duration depends on the stone condition and the surface area.
Furniture that cannot be moved by the crew should be moved before arrival.
Other services in Al Mursalat
We also provide these services in Al Mursalat.
