Building facade cleaning in Al Taawun, Jeddah
Al Taawun is a district on Jeddah's southern fringe with new housing subdivisions from the Ministry of Housing built in concrete and brick. Scattered building sites and open ground surrounding the schemes raise dust and humidity levels in the air. New facades need cleaning after the construction phase to remove dust, salt and deposits, and periodic cleaning thereafter to preserve the concrete and brick.
- Full-height exterior coverage
- Chemical and pressure washing
- Safe on glass and cladding
- Top-to-bottom rinse sequence
Why facade condition matters for your building
New housing subdivisions on the city fringe with concrete facades exposed to dust, moisture and salt, needing protection from construction deposits and salt crystallisation.
-
Coastal salt and mineral deposits
Dust from scattered building sites and open ground settles on new concrete and hardens quickly with moisture in the first year.
-
Commercial presentation and first impressions
Salt and moisture on the city fringe cause salt crystallisation and cracking in the surface layer of new concrete.
-
Protecting cladding and coating lifespans
New concrete facades need specialist cleaning that preserves the material and protects it from early damage.
-
Facilities compliance and inspection readiness
New buildings regain their original appearance once dust, salt and moisture are removed from the concrete and brick facades.
What is included in every facade clean
-
Facade surface and access inspection
-
Scaffolding or rope access rigging
-
Cleaning solution applied to facade
-
High-pressure water washing of panels
-
Manual brushing of stubborn deposits
-
Rinsing facade top to bottom
-
Cleaning ledges joints and window frames
-
Equipment removal and area cleanup
How a facade clean is carried out
-
Site survey and access assessment
-
Rigging and ground preparation
-
Chemical application, washing, and scrubbing
-
Detail clean, final rinse, and handover
What changes about building facade cleaning in Al Taawun
New concrete facades on government housing schemes show dust stains, salt deposits and moisture spots very quickly in the first year after residents move in. For the whole method, see how we approach building facade cleaning.
-
The first reason
Construction dust settles into new concrete
Scattered building sites and open ground around new schemes emit persistent fine dust. Fresh concrete absorbs dust into surface pores and dulls the finish, and cleaning removes the dust before it hardens with moisture.
-
The second reason
Salt and moisture weaken fresh concrete
Humid air carries ground and sea salt that settles on new concrete and begins to crystallise. Crystallisation causes surface cracks and spalling, and cleaning removes salt before it penetrates and weakens the structure.
-
The third reason
New buildings need specialist care
New facades in varied materials require understanding of each substrate. Cleaning preserves fresh concrete and protects it from early damage.
Landmarks of Al Taawun
In Al Taawun along Al Laith Road and near Al Hussein ibn Ali Street and Rawdat Al Taawun Housing Scheme, new Ministry of Housing buildings are scattered among open ground. The crew coordinates access based on street location and proximity to the new residential scheme.
- Al Laith Road
- Al Hussein ibn Ali Street
- Rawdat Al Taawun Housing Scheme
What the building looks like after the work
Uniform surface across all panels
Staining, salt lines, and tide marks are removed across the full facade, not just the sections reachable without rigging.
Clear joints, ledges, and window frames
Grime that collects in expansion joints, on sills, and around window frames is removed as part of the detail pass.
Site returned to normal use
All rigging, chemical containers, and waste water are removed before handover.
What our customers said
«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
«خدمة ممتازة.»
«ممتازين.»
Some of our work
Illustrative photographs. Our own job photographs go here as soon as the client approves them.
What is different about South Jeddah
South Jeddah is the working end of the city: the Islamic Port, the industrial city with its warehouses and workshops, and behind them older low rise districts such as Ghulail and Al Khumrah. The roads are built for lorries, and port and factory traffic runs through the night, so the dust that settles here is grey with diesel and metal filings rather than pale sand. Buildings are mostly older concrete with flat roofs and open stairwells that collect it. Sea humidity keeps it damp, and in summer it sets hard on ledges and cladding.
Nearby districts we cover
Questions worth asking first
Initial cleaning after construction ends removes construction dust and cement powder. Annual cleaning thereafter maintains the facade against salt and moisture accumulation.
Dust does not stain permanently but hardens into the surface when wet. Early cleaning after construction removes it easily before it sets.
Periodic cleaning removes salt and moisture before they accumulate. A protective coating applied after cleaning reduces moisture and salt absorption.
New concrete is more vulnerable to moisture and salt in the first year. Periodic cleaning protects it from early cracking and spalling.
Spalling signals salt buildup under the surface. Cleaning removes the salt but may require surface repair work after cleaning is complete.
Yes, professional cleaning preserves the finish. Mild solutions and controlled pressure remove deposits without harm.
It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Taawun.
Duration depends on building height, facade area, and the type of staining present.
In most cases, occupants can remain inside.
Other services in Al Taawun
We also provide these services in Al Taawun.
