Building facade cleaning

Building facade cleaning in Al Mursalat, Jeddah

Al Mursalat is a residential district at the far south-eastern corner of Jeddah, dominated by apartment blocks and rental housing. Moisture and dust from the expressway and surrounding areas settle on the concrete facades of residential buildings. Mould and algae grow rapidly in high humidity, leaving green and black marks that degrade the exterior. Deep cleaning removes these stains and restores facade cleanliness and the residential environment.

  • Full-height exterior coverage
  • Chemical and pressure washing
  • Safe on glass and cladding
  • Top-to-bottom rinse sequence

Why facade condition matters for your building

A densely built residential district where moisture and expressway pollution affect the quality of apartment building facades throughout the area.

  • Coastal salt and mineral deposits

    High humidity in Al Mursalat, near the southern boundary and damp environmental zones, causes rapid mould and algae growth on concrete surfaces.

  • Commercial presentation and first impressions

    Dense apartment blocks and rental housing benefit from regular cleaning schedules that demonstrate commitment to residential environment quality and public health.

  • Protecting cladding and coating lifespans

    Dust from the expressway and traffic penetrates concrete pores and causes grey discolouration that surface cleaning cannot fully remove.

  • Facilities compliance and inspection readiness

    Clean facades in a residential district improve neighbourhood image and increase resident and tenant satisfaction with their living environment.

What is included in every facade clean

  1. Facade surface and access inspection

    Facade surface and access inspection

  2. Scaffolding or rope access rigging

    Scaffolding or rope access rigging

  3. Cleaning solution applied to facade

    Cleaning solution applied to facade

  4. High-pressure water washing of panels

    High-pressure water washing of panels

  5. Manual brushing of stubborn deposits

    Manual brushing of stubborn deposits

  6. Rinsing facade top to bottom

    Rinsing facade top to bottom

  7. Cleaning ledges joints and window frames

    Cleaning ledges joints and window frames

  8. Equipment removal and area cleanup

    Equipment removal and area cleanup

How a facade clean is carried out

  1. Site survey and access assessment

  2. Rigging and ground preparation

  3. Chemical application, washing, and scrubbing

  4. Detail clean, final rinse, and handover

What changes about building facade cleaning in Al Mursalat

Concrete apartment blocks in Al Mursalat show moisture stains and mould much faster than other districts, especially on shaded, north-facing sides. For the whole method, see what building facade cleaning involves.

  • The first reason

    Moisture promotes mould and algae growth on concrete

    Damp air settles on concrete facades, creating ideal conditions for organism growth. Black and green stains make the building look neglected and aged.

  • The second reason

    Dust and pollution accumulate in concrete pores

    Dust particles from roads and traffic penetrate concrete pores, causing permanent greying. Deep cleaning extracts grit from deep within the material.

  • The third reason

    Clean facades improve resident well-being and satisfaction

    Well-maintained buildings improve neighbourhood image and increase comfort and pride among residents and tenants. Regular cleaning reflects care for the living environment.

Al Mursalat on the map

Al Mursalat sits about 2 km from Al Huthaifat and about 3 km from Al Atheer.

Open in Google Maps

What the building looks like after the work

Uniform surface across all panels

Staining, salt lines, and tide marks are removed across the full facade, not just the sections reachable without rigging.

Clear joints, ledges, and window frames

Grime that collects in expansion joints, on sills, and around window frames is removed as part of the detail pass.

Site returned to normal use

All rigging, chemical containers, and waste water are removed before handover.

What our customers said

«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
Hesham ZayanAugust 2026 · Review on Google Maps
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
Bashar Al-MushaikhiJuly 2026 · Review on Google Maps
«خدمة ممتازة.»
Abdullah Al-GhamdiAugust 2026 · Review on Google Maps
«ممتازين.»
Muhammad EshraJuly 2026 · Review on Google Maps

Read the reviews on Google

Some of our work

Sofa cleaning
Sofa cleaning
Carpet and rug cleaning
Carpet and rug cleaning
Villa cleaning
Villa cleaning
Majlis and rest-house cleaning
Majlis and rest-house cleaning
Kitchen cleaning
Kitchen cleaning
Chandelier cleaning
Chandelier cleaning
Bathroom cleaning
Bathroom cleaning
Mattress cleaning
Mattress cleaning
Office cleaning
Office cleaning
Hotel and resort cleaning
Hotel and resort cleaning
Shopping centre cleaning
Shopping centre cleaning
Marble grinding and crystal polishing
Marble grinding and crystal polishing

Illustrative photographs. Our own job photographs go here as soon as the client approves them.

What is different about South Jeddah

South Jeddah is the working end of the city: the Islamic Port, the industrial city with its warehouses and workshops, and behind them older low rise districts such as Ghulail and Al Khumrah. The roads are built for lorries, and port and factory traffic runs through the night, so the dust that settles here is grey with diesel and metal filings rather than pale sand. Buildings are mostly older concrete with flat roofs and open stairwells that collect it. Sea humidity keeps it damp, and in summer it sets hard on ledges and cladding.

Nearby districts we cover

Questions worth asking first

High humidity combined with heavy expressway traffic creates ideal conditions for rapid mould and algae growth on concrete surfaces.

Cleaning is done safely and coordinated with building management and residents. Solutions and pressure are chosen to avoid excessive moisture inside the building.

Due to high humidity, buildings may need cleaning twice yearly or whenever mould and dirt marks become visible.

Cleaning removes current stains, but humidity may cause mould to return. Good ventilation and maintenance slow regrowth significantly.

Common areas, stairwells and corridors also need attention. The crew coordinates with management to clean all surfaces consistently.

Yes, clean facades reduce water and excess moisture entry through cracks and windows, reducing internal dampness problems.

It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Mursalat.

Duration depends on building height, facade area, and the type of staining present.

In most cases, occupants can remain inside.

Need building facade cleaning in Al Mursalat?

We reach Al Mursalat at a time we agree, and you get the full cost before we start.

Call WhatsApp