Building facade cleaning in Al Mahjar, Jeddah
Al Mahjar is a central south Jeddah district between the port and major hospitals where sea salt mixes with smoke from port and industrial activity. Hospitals and residential buildings show heavy salt crusting and black smoke staining on facades from the nearby waterfront and cargo operations. High humidity from the close shoreline accelerates paint and metal corrosion. Deep cleaning removes salt, smoke deposits and trapped moisture.
- Full-height exterior coverage
- Chemical and pressure washing
- Safe on glass and cladding
- Top-to-bottom rinse sequence
Why facade condition matters for your building
The district near the port and shore combines large government buildings and residential blocks where sea salt and industrial smoke heavily impact facade quality and maintenance requirements.
-
Coastal salt and mineral deposits
Port and industrial smoke leaves black coating on all facades, especially on sides facing westerly and northerly winds.
-
Commercial presentation and first impressions
Sea salt accumulates and penetrates metals and concrete quickly, causing rust and deterioration that affects building structural integrity.
-
Protecting cladding and coating lifespans
High coastal humidity traps salt and smoke in wall pores, accelerating internal deterioration that weakens the material.
-
Facilities compliance and inspection readiness
Regular cleaning and post-cleaning protection stops corrosion and preserves government buildings and hospitals from costly repairs.
What is included in every facade clean
-
Facade surface and access inspection
-
Scaffolding or rope access rigging
-
Cleaning solution applied to facade
-
High-pressure water washing of panels
-
Manual brushing of stubborn deposits
-
Rinsing facade top to bottom
-
Cleaning ledges joints and window frames
-
Equipment removal and area cleanup
How a facade clean is carried out
-
Site survey and access assessment
-
Rigging and ground preparation
-
Chemical application, washing, and scrubbing
-
Detail clean, final rinse, and handover
What changes about building facade cleaning in Al Mahjar
Facades in Al Mahjar show combined black smoke and sea salt staining, requiring more intensive cleaning than inland districts far from port operations. For the whole method, see how we approach building facade cleaning.
-
The first reason
Port smoke leaves black coating on walls
Ships and cargo vehicles release smoke that settles on all port-facing facades. The black layer is hard to remove and gives buildings a soiled appearance. Deep cleaning extracts smoke residue and burnt oils from all surfaces.
-
The second reason
Sea salt corrodes metal and concrete quickly
Salt penetrates exposed metals and concrete rapidly, causing rust and deterioration. Hospitals and government buildings need regular salt removal to prevent structural damage.
-
The third reason
Coastal humidity traps salt and smoke in pores
Wall pores absorb salt and moisture together, causing internal corrosion that weakens the material. Deep cleaning extracts both moisture and salt from within the material before structural damage occurs.
Al Mahjar on the map
Al Mahjar sits about 3 km from Ghulail and about 3 km from Al Waziriyah.
Open in Google MapsWhat the building looks like after the work
Uniform surface across all panels
Staining, salt lines, and tide marks are removed across the full facade, not just the sections reachable without rigging.
Clear joints, ledges, and window frames
Grime that collects in expansion joints, on sills, and around window frames is removed as part of the detail pass.
Site returned to normal use
All rigging, chemical containers, and waste water are removed before handover.
What our customers said
«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
«خدمة ممتازة.»
«ممتازين.»
Some of our work
Illustrative photographs. Our own job photographs go here as soon as the client approves them.
What is different about South Jeddah
South Jeddah is the working end of the city: the Islamic Port, the industrial city with its warehouses and workshops, and behind them older low rise districts such as Ghulail and Al Khumrah. The roads are built for lorries, and port and factory traffic runs through the night, so the dust that settles here is grey with diesel and metal filings rather than pale sand. Buildings are mostly older concrete with flat roofs and open stairwells that collect it. Sea humidity keeps it damp, and in summer it sets hard on ledges and cladding.
Nearby districts we cover
Questions worth asking first
Smoke from the port and nearby industrial activity settles on walls and windows. Smoke contains oily particles that are difficult to remove with plain water.
Yes, salt penetrates all building types equally. Government buildings may need extra protection because repairs are more complex and costly.
Cleaning every six months suits buildings close to port operations. Quarterly inspections determine if extra cleaning is needed based on smoke and salt levels.
Cleaning removes salt and smoke that cause rust, but additional protection is important. Protective coating after cleaning extends the life of metals and paint.
Yes. Humidity traps salt and smoke in pores and accelerates corrosion. Regular cleaning is essential in humid environments near the coast.
Smoke sits on the surface and needs special solvents, while salt penetrates materials and requires deep extraction. Complete cleaning removes both.
It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Mahjar.
Duration depends on building height, facade area, and the type of staining present.
In most cases, occupants can remain inside.
Other services in Al Mahjar
We also provide these services in Al Mahjar.
