Building facade cleaning in Al Kawthar, Jeddah
Al Kawthar is a young district east of King Abdulaziz International Airport, with new villas and apartment buildings in glass and stone facades not yet shielded from the zone's dust and salt air. Drainage and infrastructure projects are ongoing, leaving construction dust and moisture to settle on facades. Deep cleaning removes salt crust, biological deposits and grit trapped in cracks and joints.
- Full-height exterior coverage
- Chemical and pressure washing
- Safe on glass and cladding
- Top-to-bottom rinse sequence
Why facade condition matters for your building
Wide streets and new buildings sit alongside incomplete drainage and infrastructure projects; glass and stone facades accumulate dirt rapidly and show water marks plainly.
-
Coastal salt and mineral deposits
Fine construction dust penetrates cracks and joints between new panels and settles on glass surfaces very quickly.
-
Commercial presentation and first impressions
Salt deposits and mineral stains from spray irrigation and drainage work leave white marks on stone and polished stone surfaces.
-
Protecting cladding and coating lifespans
High moisture from infrastructure work causes algae and bacteria growth on north-facing facades and shaded areas.
-
Facilities compliance and inspection readiness
New facades with large glass panels and light-coloured stone show dirt and fingerprints far more clearly than older building stock.
What is included in every facade clean
-
Facade surface and access inspection
-
Scaffolding or rope access rigging
-
Cleaning solution applied to facade
-
High-pressure water washing of panels
-
Manual brushing of stubborn deposits
-
Rinsing facade top to bottom
-
Cleaning ledges joints and window frames
-
Equipment removal and area cleanup
How a facade clean is carried out
-
Site survey and access assessment
-
Rigging and ground preparation
-
Chemical application, washing, and scrubbing
-
Detail clean, final rinse, and handover
What changes about building facade cleaning in Al Kawthar
Glass facades in new apartment buildings show fingerprints, water stains and dust deposits far more clearly than facades in older neighbourhoods. For the whole method, see what building facade cleaning involves.
-
The first reason
Construction dust settles on new facades fast
Active projects in the district send fine particles that cling to wet glass and stone. Cleaning extracts the dust from cracks and joints and restores clarity to glass panels and stone faces.
-
The second reason
Salt crust and water stains build up quickly
Moisture from drainage work and spray irrigation leaves white deposits and mineral stains on stone and glass. Deep cleaning removes these layers without damaging new surfaces or paint finishes.
-
The third reason
Cracks and joints trap grit and moisture
New facades have gaps between panels and stone sections. Grit and moisture enter these voids, causing slow erosion. Specialist cleaning reaches these areas and preserves joint integrity.
Al Kawthar on the map
Al Kawthar sits about 3 km from Al Hamdaniyah and about 4 km from Um Hablain West.
Open in Google MapsWhat the building looks like after the work
Uniform surface across all panels
Staining, salt lines, and tide marks are removed across the full facade, not just the sections reachable without rigging.
Clear joints, ledges, and window frames
Grime that collects in expansion joints, on sills, and around window frames is removed as part of the detail pass.
Site returned to normal use
All rigging, chemical containers, and waste water are removed before handover.
What our customers said
«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
«خدمة ممتازة.»
«ممتازين.»
Some of our work
Illustrative photographs. Our own job photographs go here as soon as the client approves them.
Landmarks of Al Kawthar
In Al Kawthar near Prince Khalid bin Abdullah Road and Al Masurah Street, new apartment buildings and villas are spread between Al Mubashirin Mosque and Uqbah ibn Nafi Mosque. The crew plans access based on building location near commercial projects and public areas.
- Prince Khalid bin Abdullah Road
- Al Masurah Street
- Al Mubashirin Mosque
- Uqbah ibn Nafi Mosque
- Lulu Hypermarket
Nearby districts we cover
Questions worth asking first
New materials and finishes are well protected, and cleaning uses pressure and concentrate levels suited to each surface type. Initial inspection determines the safe method for each material.
With ongoing construction and drainage work, cleaning every six months keeps facades clean. After construction ends, annual cleaning is sufficient.
Stains from mineral deposits and moisture are not permanent, but they return while construction continues. Cleaning removes them completely; ongoing work may bring them back.
Yes. Narrow cracks trap dust and moisture. Cleaning reaches these spots carefully without widening the gaps.
Stone is more porous and glass is smooth; each needs different pressure and cleaning solution. The crew adjusts the method for each material.
Ongoing work sends dust continuously, but cleaning removes what has built up and keeps facades clean until dust returns.
It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Kawthar.
Duration depends on building height, facade area, and the type of staining present.
In most cases, occupants can remain inside.
Other services in Al Kawthar
We also provide these services in Al Kawthar.
