Commercial post-construction cleaning in Al Ajwad, Jeddah
Al Ajwad is a newly planned east Jeddah district of villas, apartment buildings and commercial shop frontages along Al Ajwad Street, all needing thorough post-construction cleaning. Construction dust infiltrates ducts, windows and interior surfaces. Structured cleaning removes debris and fine dust before the premises open to staff and customers.
- Staged dust removal process
- Grilles and vents cleared
- Glass and fittings last
- Ready for handover inspection
Why staged cleaning matters after construction
A planned residential and commercial district with regular street layout, newly constructed buildings stand close together and construction dust settles into every corner and surface.
-
Opening on schedule without rework
Fine construction dust infiltrates ducts and vents during building weeks, and comprehensive cleaning extracts it from every point before operation begins.
-
Passing the contractor handover inspection
New floors in villas, apartment buildings and shops retain mortar marks and dampness, and specialist cleaning removes them without damage.
-
A safe environment from day one
Windows, frames, electrical fittings and locks need individual inspection to ensure all dust and debris are extracted completely.
-
Protecting new floors and fittings
The streets and residential passages in Al Ajwad follow a planned layout, and the crew determines access points based on each building's location and accessibility.
What is included in every job
-
Mapping debris and dust zones
-
Removing construction waste and packaging
-
Vacuuming dust from ceilings and walls
-
Scraping paint and adhesive off surfaces
-
Cleaning film and paint from glass
-
Scrubbing grout haze and concrete off floors
-
Wiping dust from fixtures and vents
-
Walking site to check finished areas
How the job runs from survey to sign-off
-
Site survey and planning
-
Coarse debris and waste removal
-
Staged dust and residue removal
-
Final walk and sign-off
What changes about commercial post-construction cleaning in Al Ajwad
Shop frontages and new apartment blocks in Al Ajwad hold construction dust heavily in floors, windows and interior fittings, requiring methodical extraction. For the whole method, see what commercial post-construction cleaning involves.
-
The first reason
Construction dust penetrates ducts and vents
Fine dust from cutting and mixing work seeps through ventilation openings, ducts and gaps around doors and windows. Cleaning removes large debris first, then extracts dust from every vent point and hard-to-reach surface.
-
The second reason
New flooring traps mortar dust and dampness
New marble, stone and ceramic floors retain mortar residue, dust and construction moisture. Cleaning removes the grey film and leaves floors bright and safe to walk on.
-
The third reason
Windows and fittings need careful inspection
Frames, panes, locks and electrical fittings suffer from construction dust and trapped dampness. Inspection determines the safe cleaning method for each element.
Al Ajwad on the map
Al Ajwad sits about 2 km from Al Manar and about 2.5 km from Al Samer.
Open in Google MapsWhat the site looks like at handover
Dust-free ducts and upper surfaces
AC grilles, duct registers and ceiling fixtures are wiped clear of construction dust.
Clean glass and clear fittings
Windows are free of paint film and installation residue.
Floors ready for final inspection
Grout haze and concrete overspray have been scrubbed from tile, stone and hard floors.
What our customers said
«شغلهم ما شاء الله، أنصح الجميع بالتعامل معهم. عن تجربة وثقة.»
«أفضل شركة تنظيف بالبخار. أسعارهم ممتازة وشغلهم مرة كويس.»
«خدمة ممتازة.»
«ممتازين.»
Some of our work
Illustrative photographs. Our own job photographs go here as soon as the client approves them.
What is different about East Jeddah
East Jeddah sits against the foothills, beyond the Haramain expressway and the ring roads, and it is where the city meets the desert edge. Apartment districts such as Al Safa and Al Naseem give way to villa areas and to new schemes still being graded out of bare ground. Dust here is the main story: fine desert sand on the spring and autumn winds, and grit from plots under construction. Some districts lie on the wadi lines that drain the hills, so a winter storm leaves mud on the streets that dries to powder.
Nearby districts we cover
Questions worth asking first
Cleaning removes building debris from floors, surfaces, corners and ducts. It includes inspection of doors, windows, frontages and dust extraction from every location.
Yes. Frontages, doors and windows are cleaned free of construction dust and residue marks. Initial inspection determines the safe cleaning materials for each surface.
The crew uses specialised tools to extract dust from ventilation openings and ducts. Visual inspection and wiping confirm no dust remains.
Yes. The method adapts to floor type. New stone floors are cleaned carefully to remove mortar residue without scratching the surface.
Once cleaning ends, the shop is ready for use immediately. Floors and surfaces are dry and free of dust.
Structural cleaning focuses on the interior. Exterior facades and pavements can be included on request as an additional service.
It is set after we see the job, because the price follows the kind of work, the size of the space, its condition and the time and materials it needs. Send a photo and a short description on WhatsApp and we will give you an estimate before we reach Al Ajwad.
Duration depends on the size of the space and how many trades have been through it.
Ideally, yes.
Other services in Al Ajwad
We also provide these services in Al Ajwad.
